This paper describes the development of a failure diagnosis technique for V-belts through vibration monitoring. The V-belt vibration is monitored at a driven bearing body attached to a power transmission device. Seven basic causes of belt failure and their combinations are considered. Power spectra of the vibration data are calculated through noise reduction by a cross-spectrum method. Six para...

The continuous reduction in power consumption of wireless sensing electronics has led to immense research interests in vibration energy harvesting techniques for self-powered devices. Currently, most vibration-based energy harvesters are designed as linear resonators that only work efficiently with limited bandwidth near their resonant frequencies. Unfortunately, in the vast majority of practic...

Nanoimprinting is a simple and efficient way to generate nanopatterns over a large area by pressing a master mould to penetrate into the surface of a substrate. It is known that interfacial friction force is a main factor responsible for pattern defects in nanoimprints. Here, nanoimprinting of metals by carbon nanotube arrays under a high-frequency vibration perturbation were studied via molecu...

Due to the lower tool as the research object to analyze the vibration of the drill string, causes the loss of the low order natural frequency of the drill string and the inherent vibration mode, give rise to the distortion and error of the result from the transient analysis of the drill string. For this purpose, the whole drill string of the deep wells is studied in the article, build the mecha...

In this paper, a study on the characteristics and the reduction methods of ground vibration due to the tilting train travelling in the conventional line is carried out. The load transmitted into the ground is computed considering the interaction between the tilting car and the line. This load is then applied in the numerical model for the analysis of ground vibration due to the travelling tilti...

The Active Vibration and Noise Reduction (AVINOR) aeroelastic simulation code for helicopter rotor blades is described. AVINOR is a research code that has been developed at UCLA and the University of Michigan for the purpose of conducting computationally efficient aeroelastic response analyses while maintaining a level of fidelity so as to be suitable for preliminary design of helicopter rotor ...

Modal parameters obtained from modal testing (such as modal vectors, natural frequencies, and damping ratios) have been used extensively in system identi"cation, "nite element model updating, and structural health monitoring. As an alternative to modal vectors, load-dependent Ritz vectors have been shown useful in various areas of structural dynamics such as model reduction and damage detection...

many procedures suggest for reduction of responses of riser to vortex induced vibrations (viv). natural frequencies of marine risers is an important parameter that can affect the responses of riser to viv. change of riser properties such as top tension and bending stiffness can alter natural frequencies. in this study effects of riser specifications on the responses and fatigue damage of marine...

Research on Active Vibration Control System (AVCS) is being carried out to reduce structural vibrations caused by unwanted vibrations in many application areas such as in space, aircraft structures, satellites, automobiles and civil structures (bridges), particularly at low frequencies. The unwanted vibration may cause damage to the structure or degradation to the structure’s performance. The A...

A great difficulty is faced in the design of such structures due to the fact that the reduction in weight results in low rigidity and reduced vibration characteristics. Apart from the vibration is effectively controlled; it may destabilize the system and may, very often, result in complete failure of the system. Several advanced applications, such as those in jet fighters, automobiles and space...