Action spectrum analyses showed that visible light-induced oxidation of 2-propanol by aerated gold-modified titanium(IV) oxide (titania) suspensions is initiated by excitation of gold surface plasmon, and polychromatic irradiation experiments revealed that the photocatalytic reaction rate depends strongly on properties of titania, such as particle size, surface area and crystalline form (anatas...

The current work reports on the development of Au nanoparticles (NPs) supported titania membrane towards enhancing catalytic reduction p-nitrophenol. Titania was successfully fabricated via chemical anodization method at 50 V in ethylene glycol: water as electrolyte. A well-ordered nanotubular array 138±18 nm pore diameter observed by electron microscope. NPs were deposited form (Au/TiO2 MF) im...

This contribution sheds light on the role of crystal size and phase composition in inducing biomimetic apatite growth on the surface of nanostructured titania films synthesized by reactive magnetron sputtering of Ti targets in Ar+O(2) plasmas. Unlike most existing techniques, this method enables one to deposit highly crystalline titania films with a wide range of phase composition and nanocryst...

Rheological studies of the ceramic based concentrated titania nanoparticle dispersions showed a clear correlation between molecular structure of the cationic polymers used as dispersants and the viscosity of the slurries. Dynamic viscosity of the electrostatically stabilized alkaline (pH 10.0) dispersions of the bare titania nanopowders with a solid loading of 15 – 25 wt.% was rather high (abou...

Solid particles dispersed in a liquid with sizes no larger than 100nm, known as nanofluids, are used to enhance Thermophysical properties compared to the base fluid. Preparations of alumina (Al2O3), titania (TiO2) and silica (SiO2) in water have been experimentally conducted in volume concentrations ranging between 1 and 2.5%. Thermal conductivity is measured by the hot wire method and viscosit...

In this work we have investigated the role of a porous carbon material used as photocatalyst itself, and catalyst support in a carbon/titania composite towards the photodegradation of phenol, and compared the results to that of bare titanium oxide. The immobilization of titania on an activated carbon provoked an acceleration of the degradation rate under UV irradiation, which is likely attribut...

Organic-inorganic hybrid materials are attractive due to the combination of properties from the two distinct types of materials. In this work, transparent titania-polydimethylsiloxane hybrid materials with up to 15.5 vol. % TiO₂ content were prepared by an in situ non-aqueous method using titanium (IV) isopropoxide and hydroxy-terminated polydimethylsiloxane as precursors. Spectroscopy (Fourier...

Since crystal phase dominantly affects the properties of nanocrystals, phase control is important for the applications. To demonstrate the size dependence in anatase-rutile phase transition of titania, we used quantum-size titania prepared from the restricted number of titanium ions within dendrimer templates for size precision purposes and optical wave guide spectroscopy for the detection. Con...