LARS/Purdue University West Lafayette, Indiana The use of computer-aided analysis techniques (CAAT) and multispectral scanner data from aircraft and satellite altitudes has shown considerable promise for water resources applications. Two areas of particular interest are: (1) temperature mapping of surface water to study the environmental impact of thermal effluents and (2) snow-cover mapping in...

Ultrahigh performance cooling is one of the important needs of many industries. However, low thermal conductivity is a primary limitation in developing energy-efficient heat transfer fluids that are required for cooling purposes. Nanofluids are engineered by suspending nanoparticles with average sizes below 100 nm in heat transfer fluids such as water, oil, diesel, ethylene glycol, etc. Innovat...

A promising energy storage option to compensate for daily and seasonal energy offsets is to inject and store heat generated from renewable energy sources (e.g. solar energy) in the ground, oftentimes referred to as soil borehole thermal energy storage (SBTES). Nonetheless, it is widely recognized that the movement of water vapor is closely coupled to thermal processes. However, their mutual int...

This paper presents a simplifiedlagrangian multiplier based algorithm to solve the fixed head hydrothermalscheduling problem. In fixed head hydrothermal scheduling problem, waterdischarge rate is modeled as quadratic function of hydropower generation andfuel cost is modeled as quadratic function of thermal power generation. Thepower output of each hydro unit varies with the rate of water discha...

The aim of this study is to find the optimal water pressure and percentage of supply vapour in the feed water heaters (fwhs) of steam power plants, such that they maximize the thermal efficiency of the Rankine cycle within pre-specified values of minimum and maximum pressures of the thermodynamic cycle. Thermal efficiency is defined as a function of unknown variables (fluid pressure and vap...

The aim of this study is to find the optimal water pressure and percentage of supply vapour in the feed water heaters (fwhs) of steam power plants, such that they maximize the thermal efficiency of the Rankine cycle within pre-specified values of minimum and maximum pressures of the thermodynamic cycle. Thermal efficiency is defined as a function of unknown variables (fluid pressure and vap...

Anomalously high thermal expansion is measured in water confined in nanoscale pores in amorphous silica and the molecular mechanisms are identified by molecular dynamics (MD) simulations using an accurate dissociative water potential. The experimentally measured coefficient of thermal expansion (CTE) of nanoconfined water increases as pore dimension decreases. The simulations match this behavio...

statistical methods, and especially machine learning, have been increasingly used in nanofluid modeling. this paper presents some of the interesting and applicable methods for thermal conductivity prediction and compares them with each other according to results and errors that are defined. the thermal conductivity of nanofluids increases with the volume fraction and temperature. machine learni...

in this study, water samples were collected from 10 thermal and non-thermal springs of mahalat setting during four periods in 2011. the discharge rates of these springs vary from 2 l/s to 45 l/s and their temperature range from an average minimum of 18oc to maximum 47oc. spring water is high in so4-cl and this is related to gypsum dissolution. correlation coefficient, principal component analys...

Homing Pacific salmon are suggested to utilise directional cues in shallow water while migrating in coastal waters. Since salmonids are typical cold-water fish, they may have to cope with warm surface water while gathering directional information. We studied behavioural thermoregulation of 31 free-ranging chum salmon Oncorhynchus keta using micro data loggers off the Sanriku coast from early Oc...