Thermal conductivity of mantle materials controlling the heat balance and thermal evolution of the Earth remains poorly constrained as the available experimental and theoretical techniques are limited in probing minerals under the relevant conditions. We report measurements of thermal conductivity of MgO at high pressure up to 60 GPa and 300 K via diamond anvil cells using the time-domain therm...

Atomic substitution in alloys can efficiently scatter phonons, thereby reducing the thermal conductivity in crystalline solids to the "alloy limit." Using In0.53Ga0.47As containing ErAs nanoparticles, we demonstrate thermal conductivity reduction by almost a factor of 2 below the alloy limit and a corresponding increase in the thermoelectric figure of merit by a factor of 2. A theoretical model...

The thermal conductivity of solid biomass fuels is useful information in the investigation of biomass combustion behavior and the development of modeling especially in the context of large scale power generation. There are little published data on the thermal conductivity of certain types of biomass such as wheat straw, miscanthus, and torrefied woods. Much published data on wood is in the cont...

Accurate knowledge of thermophysical properties is needed to predict and optimize the thermal performance of microsystems. Thermal conductivity is experimentally determined by measuring quantities such as voltage or temperature and then inferring a thermal conductivity from a thermal model. Thermal models used for data analysis contain inherent assumptions, and the resultant thermal conductivit...

important aspect of computer design, with device performance being significantly affected by temperature. In addition, device lifetime can be decreased drastically because of large thermal stresses that occur especially at interfaces. The ability of a structure to remove heat is best quantified by its thermal resistance, which is given by the temperature difference divided by input power. In mi...

LaCl₃ doped polycrystalline SnSe was synthesized by combining mechanical alloying (MA) process with spark plasma sintering (SPS). It is found that the electrical conductivity is enhanced after doping due to the increased carrier concentration and carrier mobility, resulting in optimization of the power factor at 750 K combing with a large Seebeck coefficient over 300 Μvk-1. Meanwhile, all the s...

This paper contains new, representative equations for the thermal conductivity of normal and parahydrogen. The equations are based in part upon a body of experimental data that has been critically assessed for internal consistency and for agreement with theory whenever possible. Although there are sufficient data at normal temperatures, data at very low or very high temperatures as well as near...

Theoretical model for predicting effective thermal conductivity (ETC) of metal filled polymer composites has been developed. The concept of averaging the temperature field within different phases has been used. Resistor model has been applied to determine ETC of polymer composites. A parameter estimation technique has been applied to determine the inclination angle θ. An effort has been made to...

In this work, thermal transport in nanocrystalline materials is studied using large-scale equilibrium molecular dynamics simulation. Nanocrystalline materials with different grain sizes are studied to explore how and to what extent the size of nanograins affects the thermal conductivity and specific heat. Substantial thermal conductivity reduction is observed and the reduction is stronger for n...

An analytic robust model is developed for estimating GDL thermal conductivity. The model considers PTFE addition to the GDL. Thermal conductivity of MPL is accurately measured in a compression range of 2e14 bar. Effect of thermal conductivity on PTFE, MPL, and compression is considered. Thermal contact resistances between GDL and MPL/iron surface are measured. a r t i c l e i n f o