Corn cob as a low cost adsorbent was used in the present work for the removal of toxic heavy metal Co2+ from aqueous solutions. Bath experiments were used to determine the best adsorption conditions. The equilibrium adsorption level was determined as a function of solution pH, temperature (T), contact time (tc), initial adsorbate concentration, and adsorbent dosage. Effective removal of metal i...

Biosorption is a promising alternative method to replace the existing conventional technique for Cr(VI) removal from the industrial effluent. In the present experimental design, the removal of Cr(VI) from the aqueous solution was studied by Aspergillus niger MSR4 under different environmental conditions in the batch systems. The optimum conditions of biosorption were determined by investigating...

ABSTRACTIn this work, the micro powder was the product of cedar leaf (MPCL) is used as a low-cost adsorbent for the removal of Pb2+ ions from aqueous solutions. Bath experiments were used to determine the best adsorption conditions The adsorption percentage of Pb2+ ions MPCL samples at different initial pH, contact time (tc), adsorbent dosage and temperature (T) were investigated. Effective rem...

   In the present study, CeO2/Fe2O3 nanocomposite was prepared by co-precipitation method and its application was investigated for arsenic removal from water. Characterization of the nano sized adsorbent particles was carried out using SEM and XRD techniques. Systemic adsorption experiments were performed in batch systems and the optimum conditions were obtained. The effects of p...

the present study was carried out to investigate three different adsorbents; dry cells of thebacterium exiguobacterium sp. 27, polyaniline and a mixture of both in different ratios for removal of ni(ii)from aqueous solution. the results showed that the adsorption of ni(ii) using dry cells of exiguobacteriumsp. 27 was very fast and the equilibrium time was 15 min, while the equilibrium time for ...

in this work, electrochemical methods such as tafel polarization and electrochemical impedance spectroscopy (eis) were used to study the inhibition efficiency of nettle leaves hydroalcoholic extract as a green corrosion inhibitor of api 5l carbon steel in 0.5 m h2so4 solution. the results showed that the inhibition efficiency was increased with increasing the concentration of the extract and th...

Sawdust is obtained from naturally and easily available which is biodegradable. The bio sorption capacity of the sawdust for hexavalent chromium was studied at different solution pH values (1.5-6), initial metal concentration (50450 mg/L), adsorbent dose (1-7 g/L). The maximum adsorption of Cr (VI) is obtained at pH 1.5, initial concentration 50 ppm and adsorbent dose 5 g/l. The adsorption of c...

In this paper, the Langmuir-Freundlich isotherm is used to model the interaction of several triazines (desethylatrazine, desisopropylatrazine, simazine, atrazine, propazine and prometryn) with a propazine-imprinted polymer and to explain the observed cross-reactivity. Different rebinding experiments (each herbicide alone or all together in a mixture) were carried out and the experimental bindin...

The present study investigates the biosorption of cadmium ions from aqueous solution onto unmodified, ultrasound and microwave treated cells of Saccharomyces cerevisiae. FTIR analysis was conducted to characterize the biosorbent. Equilibrium and kinetic studies of unmodified RBW (residual brewery waste) cell yeast and DSM 1333 (pure strain) were conducted by considering the effect of initial ca...

adsorption capacity of cr (vi) onto cousinia eryngioides boiss, activated carbon was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, ph, temperature, agitation speed, absorbent dose and particle size. cr (vi) removal is ph dependent and found to be maximum at ph 2.0. the amounts of cr (vi) adsorbed increased with increase...