STATEMENT OF PROBLEM It is not known whether different high-palladium alloys of similar composition possess comparable tensile strength properties associated with connector soldering. PURPOSE The purpose of this study was to evaluate the tensile strength properties of 2 high-palladium alloys on soldered connectors under simulated pre-ceramic and post-ceramic soldering conditions. MATERIAL A...

Based on meso-damage mechanics and finite element analysis, the aim of this paper is to describe the feasibility of the Gurson-Tvergaard-Needleman (GTN) constitutive model in describing the tensile behavior of corroded reinforcing bars. The orthogonal test results showed that different fracture pattern and the related damage evolution process can be simulated by choosing different material para...

Effect of 2wt% Cu addition on tensile properties and fracture behavior of Al-6Si-0.5Mg-2Ni alloy at various strain rates were studied. The solution treated Al-6Si-0.5Mg-2Ni (-2Cu) alloys, were aged isochronally for 1 hour at temperatures up to 300C. The uniaxial tension test was carried out at strain rate ranging from 10s to 10s in order to investigate the strain rate dependence of tensile prop...

Objectives: To evaluate the micro-tensile repair bond strength between aged and new composite, using silane and adhesives that were cured or left uncured when new composite was placed. Methods: Eighty Filtek Supreme XLT composite blocks and four control blocks were stored in water for two weeks and thermo-cycled. Sandpaper ground, etched and rinsed specimens were divided into two experimental g...

Mechanical response of E-glass/epoxy fiber reinforced composite was investigated in tensile loading. Different types of tabs were considered in order to evaluate their effects on the tensile strength of material. Specifically, two types of molded tabs and five types of bonded tabs were considered in the study. The influence of different amount of gripping pressures on failure mode and on tensil...

To study the adhesion of epoxy resin based endodontic sealers by determining the tensile bond strength and evaluating the effect of smear layer removal on the adhesion of the endodontic sealers. Root canals of freshly extracted mandibular first premolar teeth with single root canal, were instrumented by using rotary instrument The roots were prepared for adhesion by splitting them and embedding...

A Nd:YAG laser was used for joining a pseudoelastic Ti-51.5 at.% Ni shape memory alloy. Tensile tests on sheet metal of 0.5 mm thickness were performed at temperatures of -40°C, +20°C and 1 10°C, representing the martensitic, pseudoelastic and austenitic condition, respectively. Laser-welded specimens exhibited an ultimate tensile strength of about 820 MPa not affected by the test tempefature. ...