Recent work in the creep field has indicated that the traditional methodologies involving power law equations are not sufficient to describe wide ranging creep behaviour. More recent approaches such as the Wilshire equations however, have shown promise in a wide range of materials, particularly in extrapolation of short term results to long term predictions. In the aerospace industry however, l...

Modelling fuel behaviour requires an accurate description of the cladding stress response for both operational and safety considerations. The transient creep response of Zirconium alloys is commonly modelled using a strain hardening rule which is known to hold in cases with monotonously increasing stresses. However, the strain hardening rule is experimentally known to fail in scenarios such as ...

The study is focused on the effect of transient external force induced by a passing seismic wave on fault motion in different creep regimes. Displacement along the fault is represented by the movement of a spring-block model, whereby the uniform and oscillatory motion correspond to the fault dynamics in post-seismic and inter-seismic creep regime, respectively. The effect of the external force ...

This study estimates a fixed effects ordered logit model physician office visit billing using claims data from South Carolina Medicaid and the State Employees Health Plan. The results find code creep increasing expenditures on physician office visits at a rate of 2.2 percent annually for both programs, with no significant difference in the rate between the two. The models also indicate that phy...

Time dependent plastic deformation in metals can occur at high temperatures. Typically the creep test is conducted to characterize the deformation features; however, the conventional uniaxial power-law creep test may be impractical for small scale materials. Accordingly, instrumented indentation techniques are frequently employed. This study concerns the employment of instrumented indentation t...

--A state variable approach based on Hart’s [1] formulation for describing nonelastic deformation of crystalline solids is reviewed. It is shown to describe commonly observed deformation phenomena, such as creep. Presently, deformation phenomena such as inhomogeneous flow and those involving strong dislocation-solute interactions are not within the scope of this approach. Revue Phys. Appl. 23 (...

A physics-based fractional-order Maxwell resistive capacitor (FOMRC) model is proposed to characterize nonlinear hysteresis and creep behaviors of a piezoelectric actuator (PEA). The Maxwell resistive capacitor (MRC) model is interpreted physically in the electric domain for PEAs. Based on this interpretation, the MRC model is modified to directly describe the relationship between the input vol...

A large number of cyclic torsional shear tests on saturated soft clay under unconsolidated undrained condition have been carried out. The changing law between accumulative generalized shear strains vs. failure numbers has been analyzed and a cyclic shear strength curve has been received based on cyclic torsional shear tests. According to the test results, the criterion of saturated soft clay is...

Tensile stress develops in concrete when shrinkage deformations and restraints (internal or external) exist. Utilization of appropriate creep or relaxation functions is crucial for assessing stress and the associated cracking potential in concrete, especially at early ages when chemical and physical properties change rapidly. The existing models, developed either from compressive creep tests or...