INTRODUCTION The first aim of this "ex vivo split mouth" study was to compare the thermal elevation during the welding process of titanium bars to titanium implants inserted in pig jaws by a thermal camera and two thermocouples. The second aim was to compare the strength of the joints by a traction test with a dynamometer. MATERIALS AND METHODS Six pigs' jaws were used and three implants were...

The variety of vision inspection systems for welding defects in the present manufacturing scenario is needed for overcoming certain limitations such as the problem of inaccuracy in the images, non-uniformed illumination, noise and deficient contrast, and confusion in defects if they occur in the same spot at the surface and subsurface. Hence, it is imperative to design a new vision inspection s...

The aim of this study is to evaluate the microstructures, tensile lap shear strength, and fatigue resistance of 6022-T43 aluminum alloy joints welded via a solid-state welding technique-ultrasonic spot welding (USW)-at different energy levels. An ultra-fine necklace-like equiaxed grain structure is observed along the weld line due to the occurrence of dynamic crystallization, with smaller grain...

iii Abstract: High manganese TWIP (TWinning Induced Plasticity) steels are particularly attractive for automotive applications because of their exceptional properties of strength combined with an excellent ductility. However, as austenitic steels, they appear to be sensitive to liquid zinc embrittlement during welding, the liquid zinc arising from the melted coating due to the high temperatures...

Friction stir spot welding (FSSW) is a relatively new process that may have significant advantages compared to the fusion processes as follows joining of conventionally non-fusion weldable alloys, reduced distortion and improved mechanical properties alloys joints due pure solidstate metals. In this paper, three-dimensional model based on finite element analysis used study thermal history in sp...

Acoustic emission monitoring has been successfully employed in different application areas such as of fatigue loaded bridges and pressure testing vessels. However, this technology on resistance (spot) welding processes yielded limited results. Existing literature only mentions the detection certain defects expulsion cracked welds. Detecting nugget nucleation growth, to allow prediction diameter...

A 3-D finite element model is used to simulate water jet spot welding. The simulation is validated using the experimental data obtained by one of authors with other workers. The simulations identify parameters which correlate well with the quality of the welds produced. In particular the levels of equivalent plastic strain (PEEQ) and shear stress directions are shown to predict whether or not t...