Soy sauce powders were made by spray drying liquid soy sauce using maltodextrin as the drying aid. Maltodextrins of DE 5, DE 10 and DE 15 with concentrations of 20% and 40% (w/v) were incorporated into the soy sauce, respectively, as a carrier. The moisture adsorption isotherms of the powders with and without maltodextrins were studied. Tg of the powders were determined using a differential sca...

The blue-emitting phosphor cerium activated yttrium silicate, (Y1 mCem)2SiO5, was prepared via a novel synthesis technique called combustion synthesis. Combustion synthesis involves a highly exothermic redox reaction between metal nitrates and an organic fuel to produce a solid powder. The combustion synthesis parameter, the fuel-to-oxidizer ratio, has a direct effect on the physical properties...

We have studied the photoluminescence of nanocrystalline silicon microparticle powders fabricated by fragmentation of PSi membranes. Several porosities were studied. Some powders have been subjected to further chemical etching in HF in order to reduce the size of the silicon skeleton and reach quantum sizes. High-pressure water vapor annealing was then used to enhance both the luminescence effi...

A low-pressure plasma surface treatment of polymeric powders was carried out in a circulating fluidized bed (CFB) reactor (10 mm-I.D. × 800 mm-high) with CF4 glow discharge. The effects of solid circulation rate, treatment time and radio frequency (rf) power of plasma on fluorination of high-density polyethylene (HDPE) powders have been determined. X-ray photoelectron spectroscopy (XPS) and the...

Shielding radiation from both x-rays and gamma-rays is important for personnel in medical fields e.g. interventional radiology, nuclear power stations, and other inspection facilities where radiation is involved. Lead is known for its effective shielding property against these high energy radiations, however heaviness and toxicity are its main drawback. In this study effectiveness of non-lead p...

A novel process for the preparation of aggregate-free metal oxide nanopowders with spherical (0D) and non-spherical (1D) hollow nanostructures was introduced. Carbon nanofibers embedded with iron selenide (FeSe) nanopowders with various nanostructures are prepared via the selenization of electrospun nanofibers. Ostwald ripening occurs during the selenization process, resulting in the formation ...

Nickel silicides (NiSi) are renowned for their ability to withstand high temperatures and resist oxidation corrosion in challenging environments. As a result, these alloys have garnered interest potential applications turbine blades underwater settings. However, brittleness is constant obstacle that hinders use producing larger parts. A literature review has revealed incorporating trace amounts...

a total of 68385 live pin-worm eggs from adhesive scotch tape were exposed to different detergent powders in under to compare method of detergent washing clothes with the boiling method for the control of family enterobiasis. results show that: a) 80.4-100 percent of eggs are destroyed after hatching within 6-8 hours of exposure to 0.25 gr% detergent at 10-250c. exposure for less than 6 hours h...

The effects of excipient crystallinity and water content on the physical stability of salmon calcitonin (sCT) in a spray-dried powder for inhalation have been investigated. sCT was dissolved in water with and without mannitol and then spray dried using a Büchi 190 spray dryer. The spray dried powders were stored for 5 days at 0, 29, 51, 58, 69, and 84% relative humidity at ambient temperature. ...

Nanoporous structures were fabricated from Fe76Si₉B10P₅ amorphous alloy annealed at 773 K by dealloying in 0.05 M H₂SO₄ solution, as a result of preferential dissolution of α-Fe grains in form of the micro-coupling cells between α-Fe and cathodic residual phases. Nanoporous Fe-Si-B-P powders exhibit much better degradation performance to methyl orange and direct blue azo dyes compared with gas-...