In this paper the effects of circular and elliptical cutout on the buckling behavior of a sixteen ply quasi-isotropic graphite/epoxy symmetrically laminated rectangular composite plate [0°/+45°/45°/90°]2s, subjected to various linearly varying in-plane compressive loads, numerically. Further, this paper addresses the effects of size of elliptical cutout, orientation of elliptical cutout, plate ...

the current study presents a new analytical method for buckling analysis of rectangular and annular beams made up of functionally graded materials with constant thickness and poisson’s ratio. the boundary conditions of the beam are assumed to be simply supported and clamped. the stability equations were obtained by using conservation of energy. the critical buckling load and first mode shape we...

the current study presents a new analytical method for buckling analysis of circular plates with constant thickness and poisson’s ratio, made of functionally graded material subjected to radial load. governing equations are based on energy method for thin plates. the boundary conditions of the plate are assumed to be simply supported and clamped. the stability equations were obtained by using c...

piezoelectric nanobeams having circular, rectangular and hexagonal cross-sections are synthesized and used in various nano structures; however, piezoelectric nanobeams with hexagonal cross-sections have not been studied in detail. in particular, the physical mechanisms of the surface effect and the role of surface stress, surface elasticity and surface piezoelectricity have not been discussed t...

In this experiment effect of two full and half width sinusoidal inner tubes in triplex-tube heat exchanger with phase change material (PCM) was investigated. Length and diameter of the tubes have been chosen such that the area of each tube to be the same. Charging and discharging processes were carried out by inner tube, outer tube and both. Results indicated, PCM melting and solidification tim...

Tortuous aneurysmal arteries are often associated with a higher risk of rupture but the mechanism remains unclear. The goal of this study was to analyze the buckling and post-buckling behaviors of aneurysmal arteries under pulsatile flow. To accomplish this goal, we analyzed the buckling behavior of model carotid and abdominal aorta with aneurysms by utilizing fluid-structure interaction (FSI) ...

An experimental and analytical research on shear buckling of a comparably large polymer composite I-section is presented. It is known that shear buckling load of a large span composite beam is difficult to determine experimentally. In order to sensitively detect shear buckling of the tested I-section, twenty strain rosettes and eight displacement sensors were applied and attached on the web and...

Compressing a thin elastic film attached to a thick compliant substrate can lead to buckling instability. Two commonly observed buckling modes, buckle-delamination and wrinkling, have each been analyzed separately in previous studies. Recent experiments have observed that the two modes can co-exist and co-evolve. In this paper, by analytical and finite element methods, we present a study on con...

OBJECTIVES To compare the physical characteristics of ureteral access sheaths that affect their ability to resist buckling and kinking in the ureter. METHODS Eight commercially available ureteral sheaths were tested. The buckling pressure was measured by adding sequential loads to a point 20 cm from the tip of the sheath until the mass that resulted in buckling of the catheter was determined....

Buckling behavior of laminated composite plates subjected to in-plane loads is an important consideration in the preliminary design of aircraft components. The sizing of many structural subcomponents of the aircraft structures is often determined by stability constraints. The objective of the current study is to understand the influence of the length-to-thickness ratio, the aspect ratio, the fi...