نتایج جستجو برای: scanning electron microscopy and tensile strength ts and length increase until fracture point e parameters
تعداد نتایج: 17598168 فیلتر نتایج به سال:
C-SiC composites with carbon-based mesocarbon microbeads (MCMB) preforms are new type of highpreformance and high-temperature structural materials for aerospace applications. In this study MCMB-SiC composites with high density (2.41 g.cm-3) and high bending strength (210 MPa,) was prepared by cold isostatic press of mixed mesophase carbon powder derived from mesophase pitch with different amoun...
Transient liquid phase bonding of UNS S32750 super duplex stainless steel to AISI 304 austenitic stainless steel using BNi-2 interlayer was carried out at 1050 oC for 45 min. Microstructure analyses of the joint were carried out using optical microscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Microhardness indentation and shear strength test were performed to as...
It is known that the single-modal Weibull model describes well the size effect of brittle fiber tensile strength. However, some ceramic fibers have been reported that single-modal Weibull model provided biased estimation on the gauge length dependence. A hypothesis on the bias is that the density of critical defects is very small, thus, fracture probability of small gauge length samples distrib...
Calcium phosphate cement (CPC) is widely used as an antitumor bone-filling material. Methotrexate (MTX) is recognized as an effective chemotherapy medicine. The current study examined the effects of MTX on the mechanical properties and microstructure of CPC. Methotrexate-loaded CPC at mass ratios of 0%, 0.1%, 0.2%, and 0.5% were designated as groups A, B, C, and D, respectively, and were presse...
in this research, the effect of 2.3 wt.% aluminum addition on the microstructure and tensile properties of high manganese austenitic steel fe-18mn-0.6c was studied. for this purpose, the samples were investment cast, homogenized and hot rolled. tensile testing was carried out at ambient temperature. microstructural investigations and fractography on the steel samples were carried out using an o...
Blends of soy protein (SP) and a semicrystalline polylactide (PLA) were prepared using a twin-screw extruder. The melt rheology, phase morphology, mechanical properties, water resistance, and thermal and dynamic mechanical properties were investigated on specimens prepared by injection molding of these blends. The melt flowability of soy-based plastics was improved through blending with PLA. Sc...
Excellent mechanical properties of carbon nanotubes (CNTs) make them outstanding candidate reinforcements to enhance mechanical properties of conventional composites. The glass/polyester composites are widely used in many industries and applications. Improving the mechanical properties of such composites with addition of CNTs can increase their applications. In this research, multi-walled carbo...
in the past decades, environmental pollution caused by plastic packing materials, restrictions of petroleum resources and their high price attracted many researchers to produce biodegradable packaging materials. poor mechanic properties and high water vapor permeability are two main defects of biodegradable polymers. nanotechnology is a modification method in this case. in the current study, th...
T1B2 and CeO2 particle-reinforced A16061 hybrid composites were manufactured using stir casting hot rolling techniques. The base alloy hot-rolled at 500°C a 50% reduction was achieved through 12 passes. effect of varying TB2 particle additions on the microstructure mechanical properties Al6061 matrix studied. Scanning electron microscopy showed uniform dispersion both reinforcements, with good ...
Magnesium alloys are very attractive materials owing to their properties of low density, high specific strength and stiffness, good castability, and weldability. AZ31 magnesium alloys in terms of weldability has better situation than the other, so it has more applications than other magnesium alloys. In this study, TIG and pulsed TIG welding method was used to welding the AZ31 alloy and finally...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید