Although computer-aided design and manufacture techniques have shown some promising applications in the fabrication of crowns, inlays, and maxillofacial and oral surgery, the field of removable prosthodontics has not embraced these technologies so far. This article describes the development and investigation of computer-aided techniques that may eventually enable prosthodontic procedures such a...

Anode activity in vacuum arc plays a very important role in both characteristics of vacuum arc and the interruption capacity of vacuum interrupters. In this paper, the transient thermal processes of anode in vacuum arc in a half of arc current cycle with frequency of 50 Hz are simulated by finite element analysis software, ANSYS. Some important phenomena of anode, e.g., the melt and solidificat...

An electrospray ionization ion source coupled to a time-of-flight mass analyzer incorporating a multi-anode time-to-digital converter is described. High-speed data acquisition (kHz mass spectral acquisition) rates are achieved. The four-anode detector produces a significant increase in detection/counting efficiency over that for a single-anode detector. In this work a 2.5 times increase in dete...

microbial electrolysis cell (mec) is one of the promising and cutting-edge technologies for generating hydrogen from wastewater through biodegradation of organic waste by exoelectrogenic microbes. in the mecs, the operational parameters, such as applied voltage (eap), anode surface area, anode-cathode distance, and n2/co2 volume ratio have a significant impact on the hydrogen yield and producti...

in this paper, using a one-dimensional simulation model, the reforming process of sour gas, i.e. ch4, co2, and h2s, to the various charged particles and syngas in a dielectric barrier discharge (dbd) reactor is studied. an electric field is applied across the reactor radius, and thus a non-thermal plasma discharge is formed within the reactor. based on the space-time coupled finite element meth...

According to circumstance of kerman sarcheshmeh cooper complex that its anode slime is mainly consisted of Cu, Ag, Au, Pb and Se. In this work, recovery of silver from anode slime and subsequent synthesis of silver nanoparticles from leaching solution was made. Silver was separated from anode slime by using of HNO3 and HCl. X-Ray fluorescence spectroscopy (XRF) was used to characterize anode sl...

This study compared the difference in microbial community and power generation capacity of air-cathode MFCs enriched under anode aerobic and anaerobic conditions. Results showed that MFCs successfully started with continuous air inputting to anode chamber. The aerobic enriched MFC produced comparable and even more electricity with the fuels of acetate, glucose and ethanol compared to the anaero...

Ion back-bombardment is the dominant mechanism that limits the operating lifetime of DC high voltage GaAs photoelectron guns. In this work, an electrically isolated anode electrode was used to distinguish the QE damage contributions of ions produced within the cathode/anode gap and those produced downstream of the anode. This new anode design provides a means to suppress QE decay due to ionized...

We report a methodology for enhancing the mass transfer at the anode electrode of sediment microbial fuel cells (SMFCs), by employing a fabric baffle to create a separate water-layer for installing the anode electrode in sediment. The maximum power in an SMFC with the anode installed in the separate water-layer (SMFC-wFB) was improved by factor of 6.6 compared to an SMFC having the anode embedd...

Carbon nanofibers modified graphite fibers (CNFs/GF) composite electrode was prepared for anode in high substrate concentration microbial fuel cells. Electrochemical tests showed that the CNFs/GF anode generated a peak current density of 2.42 mA cm(-2) at a low acetate concentration of 20 mM, which was 54% higher than that from bare GF. Increase of the acetate concentration to 80 mM, in which t...