To examine a new concept for computerized production of dental prostheses, an experimental porcelain forming system was devised. Unlike other dental CAM systems, the system is intended to form porcelain much as human technicians do. The system builds up an object by alternately applying water and droplets of porcelain powder. Test specimens were made by forming porcelain powder into square plat...

PURPOSE Marginal fit is a very important factor considering the restoration's long-term success. However, adding porcelain to copings can cause distortion and lead to an inadequate fit which exposes more luting material to the oral environment and causes secondary caries. The purpose of this study was to compare the marginal fit of 2 different all-ceramic crown systems before and after porcelai...

statement of problem: the effect of porcelain surface on the antagonist acrylic teeth has not been widely studied. objectives: this study aimed to investigate the effect of polished porcelain, glazed porcelain, and natural teeth (as the control group) on the acrylic resin teeth. materials and methods: in this experimental-laboratory study, a total of 60 specimens of glazed and polished porcelai...

The aim of this study was to compare the effects of different porcelain polishing techniques on the color change and surface roughness of feldspathic porcelains and lithium disilicate glass-ceramic system. 80 porcelain specimens were divided into two subgroups, each subgroup was divided into 4 groups of 10 specimens. Surfaces were polished with different ceramic polishers. VITA Easyshade spectr...

The aim of this study was to compare the shear bond strengths (SBS) of cast, machined, and laser-sintered titanium to dental porcelain. Two kinds of dental porcelains (Titankeramik and Triceram) were applied on cast (Tritan), machined (DC-Titan), and laser-sintered (EOSINT) titanium specimens (n=10). SBS test was conducted, and fracture surface analysis was also performed to determine the failu...

PURPOSE To compare the debonding/crack initiation strength (D/CIS) of a low-fusing pressable leucite-based glass ceramic (PC) fused to metal to a feldspathic porcelain (FP) fused to metal. MATERIALS & METHODS As per ISO 9693:1999, 40 rectangular metal specimens (25.0 mm x 0.5 mm x 3.0 mm) were prepared. Twenty of the specimens were cast in a base metal nickel-chromium alloy (BA), and 20 were ...

Despite the increasing utilization of all-ceramic crown systems, their mechanical performance relative to that of metal ceramic restorations (MCR) has yet to be determined. This investigation tested the hypothesis that MCR present higher reliability over two Y-TZP all-ceramic crown systems under mouth-motion fatigue conditions. A CAD-based tooth preparation with the average dimensions of a mand...

Abstract Background and Aim: High chipping rates of the veneering porcelain of zirconia ceramic restorations have been reported in clinical studies. Thus, the shear bond strength (SBS) between the zirconia core and veneering porcelain requires investigation. Materials and Methods: In this in-vitro study, at first, using a computer-aided design/computer-aided manufacturing (CAD/CAM) machine, 1...

STATEMENT OF PROBLEM Studies concerning the effects of post-core design and ferrule on the fracture resistance of endodontically treated teeth remain controversial. PURPOSE The purpose of this study was to investigate in vitro the effects of post-core design and ferrule on the fracture resistance of root canal treated human maxillary central incisors restored with metal ceramic crowns. MATE...

The purpose of this article is to identify the incidence of complications and the most common complications associated with single crowns, fixed partial dentures, all-ceramic crowns, resin-bonded prostheses, and posts and cores. A Medline and an extensive hand search were performed on English-language publications covering the last 50 years. The searches focused on publications that contained c...