In the lungs, oxygen transfer from the inspired air to the capillary blood needs to cross the surfactant lining layer of the alveoli. Therefore, the gas transfer characteristics of lung surfactant film are of fundamental physiological interest. However, previous in vitro studies-most relied on the Langmuir-type balance-fail to cover the low surface tension range (i.e., less than the equilibrium...

A discrete-bubble model that predicts the rate of oxygen transfer in diffused-bubble systems is evaluated. Key inputs are the applied gas flow rate and the initial bubble size distribution. The model accounts for changes in the volume of individual bubbles due to transfer of oxygen and nitrogen (and hence changing partial pressure), variation in hydrostatic pressure, and changes in temperature....

Nucleate pool boiling heat transfer coefficients of Al2O3-water and TiO2-water nanofluids have been experimentally measured on three horizontal tubes with different materials and similar roughness under atmospheric pressure. Results revealed that the presence of nanoparticles in the base fluid leads to an increase in pool boiling heat transfer coefficients on stainless steel and brass tubes in ...

Bubble columns (with and without suspended solids) have been used widely as chemical reactors, bioreactors and equipment for waste water treatment. The key design parameters in bubble columns are: • gas holdup; • gas-liquid interfacial area; • volumetric liquid-phase mass transfer coefficient; • gas and liquid axial dispersion coefficients; Despite the large amount of studies devoted to hydrody...

The disposal of Waste Activated Sludge is a major problem. The paper presents several disposal routes. The ultimate steps in these routes are indirect drying and subsequent incineration. Although the design of the indirect dryers is straightforward from a required heat input, operating temperature difference between sludge bed and heating medium and the heat transfer coefficient, this coefficie...