Anode Points.-The present note is a continuation of the preceding (these PROCZEDINGS, 14, 1928, p. 50) in which the anode behavior was left outstanding. The method is the same (see Fig. 1), s in atm./106, denoting the wind pressure of positive ions when the needle of the electrode protrudes y cm. The spark gap x = 2 cm. is just within the power of the machine under the favorable circumstances (...

Biochemical oxygen demand (BOD) is a widely used index of water-quality assessment. Since bioelectrochemical BOD biosensors require anaerobic conditions for anodic reactions, they are not directly used in aerobic environments such as aeration tanks. Normally, the BOD biosensors are closed-type, where the anode is packed inside a closed chamber to avoid exposure to oxygen. In this study, a novel...

This paper investigates the effects of dead-ended anode (DEA) operation on the electrode carbon corrosion of the Proton Exchange Membrane (PEM) fuel cell. A reduced order isothermal model is developed focusing on the species concentration along the channel and associated membrane phase potential. This model explains, and can be used to quantify, the carbon corrosion behavior during DEA operatio...

The mechanical and electrochemical performance of carbon fiber-reinforced polymer (CFRP) were investigated regarding a novel improvement in the load-carrying capacity and durability of reinforced concrete structures by adopting CFRP as both a structural strengthener and an anode of the impressed current cathodic protection (ICCP) system. The mechanical and anode performance of CFRP were investi...

Electrochemical oxidation has been proposed as a remediation method for chlorinated phenols but is hampered by anode fouling. In this work we explore the mechanism of anode fouling by chlorinated phenols, compare structure vs reactivity for phenols differing in the extent of chlorination, and relate the efficiency of oxidation to the mechanism of oxidation at different electrode types. Linear s...

Electrokinetic flow of a suspension of erythrocytes (red blood cells, RBCs) in 20 num cylindrical fused-silica capillaries is examined in the present work. Flow direction anomalies are observed experimentally and tentatively explained by the development of a pH gradient between the cathode well and the anode well due to electrolysis reactions at the electrodes. This pH gradient alters the local...

By using two spatially separated reference electrodes in a single cell proton-exchange membrane fuel cell (PEMFC), the individual potentials of the anode and cathode are recorded under realistic operating conditions. The PEMFC was operated under dead-end anode (DEA) mode, without any humidification, to mitigate water accumulation at the anode. Although N2 crossover from cathode to anode may pla...

This work examines a long duration Hall thruster start transient caused by the vacuum chamber environment. During operation of a cluster of four Hall thrusters, large anode discharge fluctuations, visible as increased anode current and a more diffuse plume structure, occur in an apparently random manner. For single thrusters, the transient appears as a smoothly decaying elevated anode current w...

There is great controversy on how different set anode potentials affect the performance of a bioelectrochemical system (BES). It is often reported that more positive potentials improve acclimation and performance of exoelectrogenic biofilms, and alter microbial community structure, while in other studies relatively more negative potentials were needed to achieve higher current densities. To add...

The conventional anode for organic photovoltaics (OPVs), indium tin oxide (ITO), is expensive and brittle, and thus is not suitable for use in roll-to-roll manufacturing of OPVs. In this study, fully solution-processed polymer bulk heterojunction (BHJ) solar cells with anodes made from silver nanowires (Ag NWs) have been successfully fabricated with a configuration of Ag NWs/poly(3,4-ethylenedi...