In the standard three-rail shear test, as described in “ASTM D 4255/D 4255M The standard test method for in-plane shear properties of polymer matrix composite materials by the rail shear method” the specimen is clamped with bolts. This however, requires drilling holes through the specimen, which of course is not ideal for composite materials, because of the occurring damage around the holes. Fu...

The concept of spraying thick layer of polymer material onto metal plate has recently received considerable interest in many civilian and military applications. There are numerous analytical and numerical solutions for single thin plates (membrane) made of either a steel or an elastomer. However, solutions for composite plate made of both of the above constituents are lacking. The objective of ...

BACKGROUND Fixation of radial neck fractures can be achieved with a plate and screw construct or with two screws. This study evaluated the biomechanical properties of three different fixation methods following radial neck fractures. METHODS Twenty-four fourth-generation composite radii were sawed to simulate an unstable radial neck fracture. They were then instrumented with a plate and screw ...

An experimental setup is designed to detect composite delamination damage based on ultrasonic infrared thermography. The ultrasonic infrared thermography system is composed by ultrasonic excitation system, infrared thermal imager and data acquisition system and two damaged composite plate specimens are produced in the experiment. The image processing methods including thresholding, filters, edg...

Advanced, waveform based acoustic emission (AE) techniques have been previously used to evaluate damage progression in laboratory tests of composite coupons. In these tests, broad band, high fidelity acoustic sensors were used to detect signals which were then digitized and stored for analysis. Analysis techniques were based on plate mode wave propagation characteristics. This approach, more re...

Nonlinear effects in vibration responses are investigated for the undamaged composite plate and the composite plate with a delamination. The analysis is focused on higher harmonic generation in vibration responses for various excitation amplitude levels. This effect is investigated using the triple correlation technique. The dynamics of composite plate was modelled using two-dimensional finite ...

The active vibration control of laminated composite plates using distributed piezoelectric sensors and actuators (Fig. 1) is studied numerically with a higher-order finite element method (FEM). Reddy’s simplified higher-order theory for transverse shear deformation, which is found to be much more accurate for both thin and thick composite plates as compared with other theories, is employed for ...

Composite materials are prone to delamination as they are weaker in the thickness direction. Carbon nanotubes (CNTs) are introduced as a multiscale reinforcement into the fiber reinforced polymer composites to suppress the delamination phenomenon. This review paper presents the detailed progress made by the scientific and research community to-date in improving the Mode I and Mode II interlamin...

Introduction: Robust and efficient multilevel iterative solvers are vital for the predictive simulation of complex multiscale and multicomponent nonlinear applications. Specifically, diffusive phenomena play a significant role in wide range of applications, including radiation transport, flow in porous media, and composite materials. In fact, the solution of the diffusive component (elliptic co...