In most coal-fired power plants, pulverized coal and primary air flow from the pulverizers through a network of pipes to the burners. For proper operation of the boiler, all the coal pipes connected to any one of the pulverizers should carry the same coal flow rates and the same flow rates of primary air. Instrumentation is available commercially for making on-line measurements of coal flow rat...

Coal body is a type of fractured rock mass in which lots of cleat fractures developed. Its mechanical properties vary with the parametric variation of coal rock block, face cleat and butt cleat. Based on the linear elastic theory and displacement equivalent principle and simplifying the face cleat and butt cleat as multi-bank penetrating and intermittent cracks, the model was established to cal...

Large deposits of coal over vast expanse of lands attract mining companies, power stations and petrochemical companies and thus the development of coal towns with rail and road networks. High traffic volume of large quantities of coal across coal cities often result in the gradual accumulation of fine coal dust particles on road pavements, rail ballast and sleepers. The effect of coal dust on t...

The enrichment of coalbed methane (CBM) and the outburst of gas in a coal mine are closely related to the nanopore structure of coal. The evolutionary characteristics of 12 coal nanopore structures under different natural deformational mechanisms (brittle and ductile deformation) are studied using a scanning electron microscope (SEM) and low-temperature nitrogen adsorption. The results indicate...

Injecting water into a coal seam to enhance the cohesive strength of coal and thus minimize and reduce the coal wall spalling risk must be considered in underground coal mining systems. In general, coal with low cohesive strength contains clay minerals which may affect the stability of coal by interacting with water. Therefore, the coupled effects of moisture content and inherent clay minerals ...

due to the abundance of the non-coking coal and limitations as well as the high costs of the natural gas, the presentstudy examined the direct reduction of hematite (iron oxide) ore in the temperature range of 800-1000 °c by thenon-coking coal volatiles. approximately, 74.9% of the total amounts of volatiles and gases exit the coal up to800°c. the onset temperature to exit volatiles from the no...

Coal Tar is a semisolid byproduct obtained in the destructive distillation of bituminous coal which functions in cosmetic products as a cosmetic biocide and denaturant — antidandruff agent is also listed as a function, but this is considered an over-the-counter (OTC) drug use. Coal Tar is a nearly black, viscous liquid, heavier than water, with a naphthalene-like odor and a sharp burning taste,...

MAGNITUDE OF COAL PRODUCTION Coal accounts for approximately 74 percent of China’s primary energy consumption. China consumes more coal than Europe, Japan and the United States combined, which make up 40 percent of the world’s total. [1] China’s coal use continues to grow every year, and it is estimated that 90 percent of the rise in world coal consumption is from China. [2] Despite investments...

Power plant boiler had no arrangement of measure the coal pipe temperature in a continuous basis, though it is an important parameter for any coal fired large boiler. As pulverized coal flows through the long coal-pipe by the help of flow of hot air as a carrier, coal pipe temperature is only the measurement of the coal flow through the pipe to boiler. Low temperature indicates improper flow of...