Thermo-set based composites using epoxy resin systems currently dominate the composite industry. Glass-reinforced epoxy composites are extensively used in the structural composites of aircraft industry due to low shrinkage, ease of fabrication, chemical resistance, and higher mechanical and electrical properties. The above characteristics coupled with techno-economic considerations are mainly r...

Thermo-set based composites using epoxy resin systems currently dominate the composite industry. Glass-reinforced epoxy composites are extensively used in the structural composites of aircraft industry due to low shrinkage, ease of fabrication, chemical resistance, and higher mechanical and electrical properties. The above characteristics coupled with techno-economic considerations are mainly r...

the influence of maleic anhydride-polypropylene (mapp) (0, 2, 3 and 5%) as a compatibilizer on the wettability of polypropylene/wood flour/glass fiber hybrid composites was studied by using the contact angle determination technique. sample slats with a cross section of 10×70 mm were made by a twin screw extruder. specimens were conditioned at room temperature and the angles between the water dr...

In this study, corrosion behaviour of A356-10 vol.% SiC composites casted by gravity and squeeze casting is evaluated. For this purpose, prepared samples were immersed in HCl solution for 1h at open circuit potential. Tafel polarization and electrochemical impedance spectroscopy (EIS) were carried out to study the corrosion resistance of composites. The Tafel polarization and EIS studies of ...

The aim of this work is to evaluate the influence of fabrication methods on the com-pressive properties of sandwich composites using both experimental work and numerical simulations. Two types of sandwich composites with E-glass/Kevlar/polyester resin facings and End-grain balsa wood as core have been produced by vacuum infusion processing (VIP) and hand-lay up (HL) method. Compression tests on...

In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...

This overview of durability in composite wood products will discuss the history and background of increasing the durability of wood composites. Some of the current challenges will be presented. Processing for durable composites will include post-manufacture treatments and in-process treatments. New composites and novel approaches and treatments for durability will be discussed.

Direct composites in posterior teeth are a part of the standard therapy spectrum in modern dentistry. The excellent performance of this form of restoration in the masticatory load-bearing posterior region has now been demonstrated in numerous clinical studies. The procedure is usually carried out in an elaborate layering technique. Aside from the possibilities that highly aesthetic composites o...

This review provides a comparison of submicron-diameter carbon filaments and conventional carbon fibers as fillers in composite materials. Carbon filaments (0.1 mm diameter, catalytically grown) are superior to conventional carbon fibers (discontinuous) as a filler in providing polymer–matrix and cement–matrix composites for electromagnetic performance, but are inferior to the fibers as a fille...

The color stability of seven commercial composite restorative materials under conditions of accelerated aging was evaluated by reflection spectrophotometry at baseline and 300, 600, and 900 h. During early aging the composites generally became darker, more chromatic, and more opaque. Changes in color of the conventional composites during aging were influenced by erosion of the resin matrices an...