Aim The aim of the present work was to compare the elastic properties and internal structure of 4 different CAD/CAM chairside materials, by the method of Scanning Impulse Acoustic Microscopy (SIAM). Methods Four chairside CAD/CAM materials with different structures from hybrid ceramic (VITA Enamic, VITA Zahnfabrik), feldspatic ceramic (VITABlocs Mark II, VITA Zahnfabrik), leucite glass-cerami...

This study was performed to evaluate the effect of a lithium-disilicate spray-liner application on both the bond strength between zirconia cores and heat-pressed lithium-disilicate glass-ceramic veneers, and the fracture strength of all-ceramic zirconia crowns. A lithium-disilicate reinforced liner was applied on the surface of a zirconia core and lithium-disilicate glass-ceramic was veneered o...

The development of high-strength ceramics and its use in posterior areas has been a field of constant investigation. The performance of all-ceramic molar crowns fabricated with new CAD/CAM techniques is a subject of interest. The studies available in literature focused on the analysis of all-ceramic restorations failures, investigating several parameters involved on the tooth structure. The goa...

The aim of this study was to evaluate the effectiveness of the microfocus radiograph CT system in examining the adaptation of all-ceramic crowns three-dimensionally and non-destructively. The computed tomograms of the crown and abutment model were filmed by microfocus radiograph CT. Using a volumetric rendering software, images of gaps were extracted and reconstructed three-dimensionally, and t...

The aim of this study was to test whether veneering of the submucosal part of zirconia abutments using pink veneering ceramic positively influences the color of the peri-implant mucosa. Single-tooth implants were restored with either white zirconia abutments (control group) or pink-veneered zirconia abutments and all-ceramic crowns. Esthetic outcome measurements included a spectrophotometric ev...

The drive for all-ceramic or metal-free dentistry has had its ups and downs over the past decade. However, computer-aided design/computer-aided manufacturing (CAD/ CAM) materials have been introduced into the marketplace for the fabrication of single-unit restorations and 3and 4-unit bridges. These materials hold promise for predictably satisfying the need for esthetic and strong restorations f...

With the increase in adult orthodontic treatment comes the need to find a reliable method for bonding orthodontic brackets onto metal or ceramic crowns and fixed partial dentures. In this study, shear bond strength and surface roughness tests were used to examine the effect of 4 different surface conditioning methods: fine diamond bur, sandblasting, 5% hydrofluoric acid, and silica coating for ...

An analysis is made of contact damage in brittle coatings on metal substrates, using a case study of a dental porcelain coating of thickness between 0.1 and 1 mm fused onto a Pd alloy base, with spherical indenter of radii 2.38 and 3.98 mm. At large coating thicknesses (>300 mm), the first damage takes the form of surface-initiated transverse cone cracks outside the contact. At small coating th...