background & aims of the study: dyes are one of the widespread chemicals which may have many adverse effects on life cycle. thus, this study was conducted to survey the rb19 dye removal efficacy from aqueous solution, using the sio2 nanoparticles. materials and methods: this study was an experimental-lab study. the batch adsorption system were utilized to evaluated the rb19 dye removal efficien...

a batch adsorption study was applied to investigate the adsorption of pb2+ ions from aqueous solutionby nanographene (ng).the adsorption percentage of pb2+ions onto ng samples at different initial ph,contact time (tc), adsorbent dosage (mng) and temperature (t) were investigated. the results showedthat ng is an excellent adsorbent for pb2+ions removal from aqueous solutions with an adsorptionpe...

background: the presence of heavy metals in the environment especially in water supplies have caused many concerns because of their toxicity and non-degradability. hexavalent chromium (cr) is one of the most toxic metals which is used in many industries, so it is essential to remove it from industrial wastewater. in this study, we made a comparison between different adsorption isotherms in the ...

Phosphate removal is important in the control of eutrophication of water bodies and adsorption is one of the promising approaches for this purpose. A Fe-Mn binary oxide adsorbent with a Fe/Mn molar ratio of 6:1 for phosphate removal was synthesized by a simultaneous oxidation and coprecipitation process. Laboratory experiments were carried out to investigate adsorption kinetics and equilibrium,...

In this account, a one-step green hydrothermal method for zirconium-loaded reduced graphene oxide (RGO-Zr) adsorbent was developed in pure water. It is based on the formation of initially strong-coupling RGO-Zr nanocomposites followed by in situ reduction of GO to RGO during the hydrothermal treatment. The phosphate adsorption performance of the as-prepared nanocomposites was investigated in aq...

batch experiments were conducted to study the adsorption behaviors of lead ion (pb2+) onto ferrihydrites prepared using three different procedures which were characterized  by textural analysis (bet). the adsorption removal of pb2+ by the three ferrihydrites (called fh-1, fh-2 and fh-3, respectively) were compared, and fh-3 shows fast adsorption kinetics as well as high adsorption capacities, t...

Porous zirconium alginate beads as a novel adsorbent were prepared for fluoride removal and characterized by SEM, FTIR, TG, EDX and XPS. The effect of solution pH, adsorbent dose, initial fluoride concentration, contact time, medium temperature and the coexisting ions on adsorption capacity of fluoride ion has been studied. The presence of HCO3 , SO4 2and PO4 3had a large negative impact on flu...

The inhibitive effect of congo red was examined as corrosion inhibitor for the corrosion of zinc in 1N HCl by conventional weight loss and gasometric methods. Results obtained show that congo red exhibited high inhibition efficiencies. The inhibition efficiency was found to increase with increase in the inhibitor concentration. The adsorption of the inhibitor molecules on the zinc metal surface...

The inhibitive effect of a few thiols were examined as corrosion inhibitors for the corrosion of zinc in 1N HCl and 1N H2SO4 by conventional weight loss and gasometric methods. Results obtained show that all the thiols exhibited high inhibition efficiencies. The inhibition efficiency was found to increase with increase in the inhibitor concentration. The adsorption of the inhibitors obeyed Temk...

In this study adsorption of 1-chloro-4-nitrobenzene (CNB) from aqueous solutions onto multi-walled carbon nanotubes (MWCNTs) was surveyed. The effect of some key parameters such as pH (2-10), carbon nanotubes dosage (0.02-0.1 mg/250mL), CNB concentration (2- 16 mg/L), and temperature (20,30,40,50°C) were investigated. The results showed that, the variation of initial pH and CNB concentration ex...