It is well known that transport paths of photocarriers (electrons and holes) before collected by electrodes strongly affect bulk recombination and thus electrical properties of solar cells, including open-circuit voltage and fill factor. For boosting device performance, a general design rule, tailored to arbitrary electron to hole mobility ratio, is proposed to decide the transport paths of pho...

Cadmium telluride (CdTe) tetrapods are synthesized with varying aspect ratios through multiple injections of the Te precursor, which provides an excellent means of controlling and tailoring the optical properties of the tetrapods. The self-assembly of CdTe tetrapods at the air/water interface is explored using the Langmuir-Blodgett (LB) technique due to potential use in solar cells arising from...

An optical simulation of poly(3-hexylthiophene) (P3HT)/Si nanowire array (NWA) hybrid solar cells was investigated to evaluate the optical design requirements of the system by using finite-difference time-domain (FDTD) method. Steady improvement of light absorption was obtained with increased P3HT coating shell thickness from 0 to 80 nm on Si NWA. Further increasing the thickness caused dramati...

Polymer solar cells have been characterized during and after x-ray irradiation. The open circuit voltage, dark current and power conversion efficiency show degradation consistent with the generation of defect states in the polymer semiconductor. The polymer solar cell device remained functional with exposure to a considerable dose (500 krad (SiO(2))) and showed clear signs of recovery upon remo...

This article presents 3-D aluminum micro-nanostructures for enhanced light absorption. Periodic microhole arrays were created by firing a train of femtosecond laser pulses at megahertz pulse frequency onto the surface of an aluminum target at ambient conditions. The laser trains ablated the target surface and created microholes leading to the generation of deposited nanostructures inside and ar...

Semiconductor nanowires are promising for photovoltaic applications, but, so far, nanowire-based solar cells have had lower efficiencies than planar cells made from the same materials, even allowing for the generally lower light absorption of nanowires. It is not clear, therefore, if the benefits of the nanowire structure, including better charge collection and transport and the possibility of ...

Optical and electrical properties of complex semiconducting alloys like Cu(In,Ga)Se2 (CIGS) are strongly influenced by the reaction pathways occurring during their deposition process. This makes it desirable to observe and control these properties in real-time during the deposition. Here we show for the first time the evolution of the band gap and the sub-band-gap defect absorption of CIGS thin...

We study in this paper the localization of light and the dielectric properties of thin metal-dielectric composites at the percolation threshold and around a resonant frequency where the conductivities of the two components are of the same order. In particular, the effect of the loss in metallic components are examined. To this end, such systems are modelized as random L − C networks, and the lo...

Plasmonic nanostructures can significantly advance broadband visible-light absorption, with absorber thicknesses in the sub-wavelength regime, much thinner than conventional broadband coatings. Such absorbers have inherently very small heat capacity, hence a very rapid response time, and high light power-to-temperature sensitivity. Additionally, their surface emissivity can be spectrally tuned ...

We present measurements of the complete spatiotemporal Fourier spectrum of Faraday waves. The Faraday waves are generated at the interface of two immiscible index matched liquids of different density. By use of a light absorption technique we are able to determine the bifurcation scenario from the flat surface to the patterned state for each complex spatial and temporal Fourier component separa...