نتایج جستجو برای: isotherm model
تعداد نتایج: 2107354 فیلتر نتایج به سال:
removal of cesium from synthetic aqueous solution through adsorption on vermiculite, under batch equilibrium experimental condition at six initial values of ph (3, 4, 6, 9, 11 and 12) and five temperatures (25, 50, 75, 85 and 95 °c) has been investigated. it is necessary to propose a suitable model for a better understanding of the mechanism of cesium adsorption on vermiculite. for this propose...
the used activated carbon was derived from pine-cone and was used for the removal of acid black 1(ab1) and acid blue 113(ab113) dyes. a batch sorption study was carried out in order to obtain optimum isotherm model. the study showed the best fit of the adsorption isotherm data was obtained using the langmuir model for both dyes. the monolayer maximum saturation capacities of ab1 and ab113 dyes ...
In this work, zeolite 13X with porosity structure has been used as an adsorbent for adsorption of CO2 flue gas. The effect of operating conditions including pressure and time on adsorption capacity were investigated. The experiments conditions are constant temperature, the range of pressure 1 - 9 bar and the registration of adsorption capacity with passing of time. Experimental data were adjust...
ss as: Sa t bark. Abstract Biosorption of nickel ions from aqueous solutions by modified loquat bark waste (MLB) has been investigated in a batch biosorption process. The biosorbent MLB was characterized by FTIR analysis. The extent of biosorption of Ni(II) ions was found to be dependent on solution pH, initial nickel ions concentration, biosorbent dose, contact time, and temperature. The exper...
Arsenic contamination in water poses a serious threat on human health. The tea fungus known as Kombucha is a waste produced during black tea fermentation. The objective of this study was to examine the main aspect of a possible strategy for the removal of arsenates employing tea fungal biomass. The pretreatment of biomass with FeCl3 was found to improve the biosorption efficiency. Arsenics upta...
In this study Ceramium virgatum has been characterized and used for the removal of cadmium and lead from aqueous solutions. The effect of pH, adsorbent dosage, contact time and temperature on adsorption process was studied in batch experiments. Langmuir and Freundlich models were applied to describe the biosorption isotherm of the metal ions by C. virgatum biomass. The adsorption data can be we...
A biosorbent prepared from Ascophyllum nodosum seaweed biomass, FCAN2, was examined for its sorption capacity. Equilibrium batch sorption studies were performed using two-matal systems containing either (Cu + Zn), (Cu + Cd), or (Zn + Cd). In the evaluation of the two-metal sorption system performance, simple isotherm curves had to be replaced by three-dimensional sorption isotherm surfaces. In ...
An iron (III)-impregnated sorbent was prepared from sugarcane bagasse and ferric chloride solution via carbonization/activation in a muffle furnace at 500 C for 4 h. The adsorption removal of chromium (VI) from aqueous solution by the iron (III)-impregnated sorbent was then studied in a batch system. With increasing initial chromium (VI) concentration from 25 to 130 mg/L at an adsorbent dose of...
This research article deals with an electrosynthesis of hydrous titanium dioxide by anodic dissolution of titanium sacrificial anodes and their application for the adsorption of manganese from aqueous solution. Titanium sheet was used as the sacrificial anode and galvanized iron sheet was used as the cathode. The optimization of different experimental parameters like initial ion concentration, ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید