The microstructure obtained as the weld cools from the liquid phase to ambient temperature is called the as–deposited or primary microstructure. Its major components include allotriomorphic ferrite, Widmanstätten ferrite, and acicular ferrite (Fig. 1). There may also be some martensite, retained austenite or degenerate pearlite. These latter phases occur in very small fractions, and are known b...

We introduce a new class of high-porosity microstructures, called “single-scale laminates,” made from arrays of parallel walls. They are extremal, in the sense that no stiffer structure exists with the same total mass. They are simple, in the sense of being easy to describe, and perhaps to manufacture. And they are universal: for any high-porosity microstructure there is a single-scale laminate...

Power system performance is affected by dynamic characteristics of hydraulic governor-turbines during and following any disturbance, such as occurrence of a fault, loss of a transmission line or a rapid change of load. Accurate modelling of hydraulic governor-turbines is essential to characterise and diagnose the system response during an emergency. In this article, both detailed and simplified...

A better understanding of the mechanistic basis of stomatal control is necessary to understand why modes of stomatal response differ among individual trees, and to improve the theoretical foundation for predictive models and manipulative experiments. Current understanding of the mechanistic basis of stomatal control is reviewed here and discussed in relation to the plant hydraulic system. Analy...

The hydraulic system of mobile garbage compression equipment was studied according to its actual working conditions. A simulation model of the hydraulic system was established with AMESim software, and the speed and acceleration of the piston rod were simulated. Simulation results show that the designed hydraulic system can achieve the action requirements. The experiment also shows the similar ...

Verification tests of the forward modeling technique for near-field high energy diffraction microscopy (HEDM) are conducted using two simulated microstructures containing uniformly distributed orientations. Comparison between the simulated and reconstructed microstructures is examined with consideration to both crystallographic orientation and spatial geometric accuracy. To couple the simulatio...

Composite thin films are a new area of study with many applications, e.g. metal + oxide thin films in high density magnetic recording media. Engineering the processing, microstructure and properties of these thin films is of great importance. It has been found that microstructures of the thin films depend strongly on the oxide volume fraction and pressure during sputtering. Surface diffusion an...

In order to improve the impact performance, the structure of hydraulic hammer should be optimized. In this paper, the ranges of eight vital structure parameters of piston and reversing valve system of hydraulic hammer were selected firstly; and then found the best value of different parameters under experiments with the method of computer optimization and the parametric analysis method provided...

Many studies have demonstrated linkages between the occurrence of fog and ecophysiological functioning in cloud forests, but few have investigated hydraulic functioning as a determining factor that explains sharp changes in vegetation. The objective of this study was to compare the plant water status during cloud-immersed and non-immersed conditions and hydraulic vulnerability in branches and r...