High velocity oxy-fuel (HVOF)coating have shown high resistance to corrosion in fossil energy applications and it is generally accepted that mechanical failure, e.g. cracking or spalling, ultimately will determine coating lifetime. The use of HVOF thermal spray to apply coatings is one of the most commercially viable and allows the control of various parameters including powder particle velocit...

Ultra-high molecular weight polyethylene (UHMWPE) thin film was coated onto Ti6Al4V alloy specimens using dip coating method. Tribological performance of this coating (thickness of 19.6 ± 2.0 μm) was evaluated using 4 mm diameter Si(3)N(4) ball counterface in a ball-on-disk tribometer. Tests were carried out for different normal loads (0.5, 1.0, 2.0 and 4.0 N) and rotational speeds of the disk ...

An experimental polyethylene–candelilla-wax coating formulation was evaluated in comparison to a high-gloss, shellac and wood resin citrus coating for storage of ‘Valencia’ oranges at 15–25°C. Oranges with the wax coating had relatively high flavor scores (8.9–10.4) even after 9–16 days storage at 15–25°C. By contrast, the high-gloss coating, shown to be typical of such citrus coatings, resulte...

Forging dies at high temperatures are under contact pressure, variable mechanical loads and thermal shock, furthermore they should withstand wear and friction in a high level. So, in order to increase die life, the selection of die material, coating and hardness is essential. In this review, various methods used for die life enhancement such as carbide coating, using the super alloy stellite 6 ...

Real time monitoring of contamination on antireflection (AR) silica coatings in high peak power laser systems (HPLs) is critically needed order to avoid reductions transmission and damage optical surfaces. Herein we proposed apply a surface acoustic wave (SAW) sensor real-time monitor trace amounts airborne molecular contaminants (AMCs) adsorbed the AR coatings. The coating found be susceptible...

High velocity oxy-fuel (HVOF) is one of the emerging technologies among the thermal spraying techniques, for producing uniform and dense coatings, having high hardness and very low porosity. A NiCrBSi alloy coating was prepared with approximately 400µm thick, on the A516 steel by means of HVOF and was analyzed with regard to its detailed microstructures, phase formation, thickness, roughness an...

In this study, we describe the experiments determining whether coating gold nanoparticles with tetraethylene glycol (TEG) provides pharmacologically relevant advantages, such as increased serum half-life and resistance to protein adsorption. Monodisperse TEG-coated, NaBH4-reduced gold nanoparticles with a hydrodynamic size comparable to albumin were synthesized by reducing gold chloride with Na...

Coating of gold-decorated silica nanoparticles with polyethylene glycol (PEG) was carried out in the aerosol phase. The process involves first functionalizing the nanoparticles at ~225 ° C with a bifunctional reactant, 2-mercaptoethanol (ME), for which one end is a thiol that attaches to the gold surface and the other end is a terminal hydroxyl group, and then introducing ethylene oxide (EO), w...

Wear tests were carried out on different DLC coatings under lubricated and dry slip-rolling friction in a Twin-Disc Testing rig. The analysis of Acoustic Emission (AE) provided an easy and comfortable tool for monitoring the wear life of DLC coatings. A DLC coating in-service was indicated by the appearance of no or just single AE events due to single damages (crack, small spallings, etc.) to t...

The host response to calcium silicate ceramic coatings is not always favorable because of their high dissolution rates, leading to high pH within the surrounding physiological environment. Recently, a zinc-incorporated calcium silicate-based ceramic Ca2ZnSi2O7 coating, developed on a Ti-6Al-4V substrate using plasma-spray technology, was found to exhibit improved chemical stability and biocompa...