This paper considers a linear one dimensional inverse heat conduction problem with non constant thermal diffusivity and two unknown terms in a heated bar with unit length. By using the WKB method, the heat flux at the end of boundary and initial temperature will be approximated, numerically. By choosing a suitable parameter in WKB method the ill-posedness of solution will be improved. Finally, ...

A three-dimensional computational model of an experimental rectangular combustion chamber was developed to explore the wall heat transfer of a GO2/GH2 shear coaxial single element injector. The CFD model allowed for the direct analysis of heat transfer effects due to flow dynamics—an analysis that would be very difficult using experimental studies alone. The use of a 3-D CFD model revealed heat...

Heat transfer from the internal surfaces of a vertical pipe to the adjacent air gives rise to the air flow establishment within the pipe. With the aim of optimizing the convective air flow rate in a vertical pipe, the details of the flow and thermal fields were investigated in the present study. Conservation equations of mass, momentum, and energy were solved numerically using simple implicit f...

In order to examine the laminar convective heat transfer of nanofluid, experiments carried out using silver-oil nanofluid in a concentric annulus with outer constant heat flux as boundary condition. Silver-oil nanofluid prepared by Electrical Explosion of Wire technique and observed no nanoparticles agglomeration during nanofluid preparation process and carried out experiments. The average size...

In the current work optimization of double pipe fin-pin heat exchanger has been studied. The effective parameters those are controlling the heat exchanger performance are divided in two categories; geometrical and operating conditions. Using the Brent’s optimization algorithm and handling the thermodynamically design concept, one can minimize entropy generation in different length of heat excha...

Title of Document: FORCE FED MICROCHANNEL HIGH HEAT FLUX COOLING UTILIZING MICROGROOVED SURFACES Edvin Cetegen, Doctor of Philosophy, 2010 Directed By: Michael Ohadi, Professor Department of Mechanical Engineering Among other applications, the increase in power density of advanced electronic components has created a need for high heat flux cooling. Future processors have been anticipated to exc...

The Bowen ratio-energy balance (BREB) is a micrometeorological method often used to estimate latent heat flux because of its simplicity, robustness, and cost. Estimates of latent heat flux have compared favorably with other methods in several studies, but other studies have been less certain, especially when there was sensible heat advection. We compared the latent heat flux of irrigated alfalf...

In this paper, the innovative intelligent fuzzy weighted input estimation method (FWIEM) can be applied to the inverse heat transfer conduction problem (IHCP) to estimate the unknown time-varying heat flux efficiently as presented. The feasibility of this method can be verified by adopting the temperature measurement experiment. We would like to focus attention on the heat flux estimation to th...

‎in this paper‎, ‎we consider an inverse boundary value problem for two-dimensional heat equation in an annular domain‎. ‎this problem consists of determining the temperature on the interior boundary curve from the cauchy data (boundary temperature and heat flux) on the exterior boundary curve‎. ‎to this end‎, ‎the boundary integral equation method is used‎. ‎since the resulting system of linea...

This paper addresses the potential for predicting heat flux from thermographic phosphor measurements. Temperature can be measured using thermographic phosphors by extracting the intensity decay of the phosphor, which is temperature dependent. This measured temperature can then be used to estimate boundary heat fluxes, which is often called the inverse heat conduction problem. Heating rate can a...