Objective To evaluate the effect of aging in a hard denture reline (New Truliner) and an acrylic resin (Classic) after chemical and mechanical polishing. Methods Eighty specimens were made, divided randomly between 8 groups: G1.Acrylic Resin Classic (RAC)/Mechanical Polishing (PM); G2.RAC/PM + thermocycling (TR); G3) RAC/Chemical Polishing (PQ); G4.RAC/PQ + TR; G5.New Truliner (NT)/PM; G6.NT/PM...

Introduction: The degree of polymerization depends on the type of light-curing unit. The aim of this study was to compare the hardness of composite resin cured by LED and Halogen light curing units. Methods: In this experimental study, 20 cylindrical samples of Tetric Ceram composite were prepared. Half of them were cured with Ultralume 2 LED and the other half with Astralis 7 Halogen light cur...

The purpose of this study was to evaluate the microhardness of resin-based materials polymerized with a LED (light-emitting diode) light-curing unit (LCU) and a halogen LCU. Twenty cylindrical specimens (3.0 mm in diameter and 2.0 mm high) were prepared for each tested material (Z100, Definite and Dyract). Specimens were light-cured with two LCUs (Ultraled and Curing Light 2500) for either 40 o...

Rationale: Table compression process has a profound effect on different quality attributes of table manufacturing process such as appearance, content uniformity, hardness, thickness, friability, Disintegration time and Dissolution time. Among all the table compression parameters, feeder speed, precompression, main compression forces and Turret speed have a substantial effect on tablet propertie...

ZrO2 nanoparticles were synthesized by a vapor-phase hydrolysis process, and characterized in terms of crystalline structures, hardness and microstructures by X-ray diffraction, Vickers hardness test method, and atomic force microscopy (AFM) measurements. Moreover, in vitro cytotoxicity evaluation and hemolysis assay showed that the nanoparticles possessed good biocompatibility. Hardness invest...

AIM The aim of the present study was to assess the change in physical properties (surface roughness, surface hardness and phase transformation) after surface grinding of zirconia by using three commercially available abrasives. MATERIALS AND METHODS Thirty sintered zirconia specimens were prepared and divided into three groups namely Group M (grinded using Mani Dia diamond bur standard grit),...

A group of Stellite alloys are studied in consideration of temperature effects on their hardness and wear resistance. The hardness test is conducted on a micro-hardness tester with a hot stage equipped that allows heating the specimen up to 650°C. The wear resistance of each alloy is evaluated using a pin-on-disc tribometer with a heating furnace built-in that provides the temperature capacity ...

In the present study short-term (96 hr) toxicity of mercury in relation to water hardness (270 and 560 mg/l) and temperature (16 degrees C and 35 degrees C) to the fingerlings of Indian major carps, i.e. catla, rohu and mrigal has been evaluated using static bioassay. The LC5o indicates that both water hardness and temperature played significant role in mercury toxicity. The test fishes were fo...

introduction one of the limitations of tissue conditioners (tc) is gradual hardening of the material in a short time period after insertion in the mouth, due to the loss of their viscoelastic properties. the aim of this study was to determine the softness of two different tissue conditioners with and without the monopoly coating. methods and materials in this experimental study, acropars and vi...

This study evaluated the influence of methacrylic acid (MA) incorporation on hardness, roughness, and flexural strength of a denture base acrylic resin. Thirty-two circular and 40 rectangular specimens were divided into four groups, according to the concentration of MA substituted into the monomer component of a heat-polymerized acrylic resin, as follows: 0% (Control), 10%, 20% and 50% (v/v). T...