The cost associated with the application of large volume of cement and synthetic admixtures was one of the major drawbacks of Self Compacting Concrete (SCC), which can be reduced by the use of supplementary cementitious materials (SCM). When the demand of cement reduces, the release of carbon dioxide (CO2) from cement industries will come down, which has a positive impact on global w...

Fly ashes were collected from five power plants under two loads in China. The ashes were heated at four different temperatures, and mercury speciation was determined based on the release regular pattern of mercury with temperature. The mercury concentration, unburned carbon content and mean ash particle sizes were measured. The correlation of mercury capture and unburned carbon content, mean as...

This research is a part of a wide range investigation on the use of flue gas desulphurisation (FGD) in construction applications. It reports some results on the porosity and pore size distribution of cement paste containing varying amounts of fly ash-gypsum blends as partial replacement of cement. The cement was replaced with 25% of different blends of fly ash and gypsum. The gypsum content ran...

Material adsorption, the reverse process of evaporation diffusion, directly reflects the wettability of materials. Wettability is one of the main factors that affect the drying shrinkage of materials. A device that measures the wettability of recycled aggregate concrete (RAC) with fly ash is proposed in this study based on pore structure theory. The isothermal absorption curve of RAC is examine...

Quartz (α-quartz), is the most common crystalline silica polymorph in nature and is the only polymorph found in significant concentrations in coal and coal ash. Since exposure to quartz is liable to cause lung diseases, it is very important to know its concentrations in coal ash and to evaluate its effects on the workers. Inhalation is the most effective route of entry for airborne particles of...

This project consisted of performance testing and evaluation of concrete containing high-carbon fly ash and carbon fibers. One of the primary aims of this project was to further determine the effect of using high-carbon fly ash and carbon fibers on the electrical properties of concrete. This is a part of the continuing work performed initially by the UWM Center for By-Products Utilization (UWM-...

An estimated 229,000 m(3) of coal fly ash remains in the river system after dredging to clean-up the 2008 Tennessee Valley Authority (TVA) spill in Kingston, Tennessee. The ash is heterogeneous with clear, orange and black spheres and non-spherical amorphous particles. Combustion produces iron oxides that allow low field magnetic susceptibility (χ(LF)) and percent frequency dependent susceptibi...

An investigation was conducted to determine the influence of recycled scrap tire rubber on the engineering properties of controlled low strength material (CLSM). With control over the ultimate compressive strength of CLSMs being key for applications such as backfilling utility trenches where re-excavation is often necessary, incorporation of scrap tire rubber into the CLSM mixture is a viable w...

The present study was conducted for the removal of color of pulp and paper mill effluent using coal fly ash as an adsorbent. The effect of adsorbent dose and pH on color removal has been determined. 100 % color removal was achieved when adsorbent dose was 2.4 gm or more and at pH 6.8 and above. Jr. of Industrial Pollution Control 24 (1)(2008) pp 1-8 © Enviromedia Printed in India. All rights re...