PURPOSE To evaluate the effect of various surface treatments on the surface structure and shear bond strength (SBS) of different ceramics. MATERIALS AND METHODS 288 specimens (lithium-disilicate, leucite-reinforced, and glass infiltrated zirconia) were first divided into two groups according to the resin cement used, and were later divided into four groups according to the given surface treat...

A challenge in regenerating large bone defects under load is to create scaffolds with large and interconnected pores while providing a compressive strength comparable to cortical bone (100-150 MPa). Here we design a novel hexagonal architecture for a glass-ceramic scaffold to fabricate an anisotropic, highly porous three dimensional scaffolds with a compressive strength of 110 MPa. Scaffolds wi...

This study investigated occupational exposure to silica dust of 48 workers in stone cutting, glass making, ceramic, and sand blasting plants in the north of Iran. Samples were collected from the breathing zone using a personal sampling pump and a size-selective cyclone. Sample filters and blanks were analysed using infrared spectroscopy. The mean sampling period was 4.83 h. Mean exposure of wor...

This in vitro study quantified the marginal discrepancy of the implant-to-prosthetic-crown interface on nonsubmerged dental implants restored with either a cemented or a screw-retained approach. Metal-ceramic crowns were fabricated for 20 ITI 4.1 x 10 mm solid-screw titanium implants. Ten implants received octa abutments and screw-retained crowns fabricated on premachined gold cylinders. The re...

The elimination of residual glass in hot-pressed Y-α-SiAlON was demonstrated by varying the nitride composition. This was readily achieved by adding excess aluminium nitride (AlN), while the addition of excess Si3N4 had little effect. The amount of excess AlN required for this purpose increased with increasing Al and O content in α-SiAlON, and was higher if α-SiAlON contained larger interstitia...

In an experimental study the bond strength of stainless steel, ceramic and plastic brackets to bovine enamel was investigated by tensile testing. The brackets were cemented to the enamel using a conventional two-paste orthodontic bonding resin, a light-cured, fluoride-releasing adhesive, a no-mix-orthodontic bonding resin and a light-curing glass ionomer cement. For evaluation of the experiment...

In this work, the role of shock-wave (SW)-induced increase of bone morphogenetic proteins (BMPs) in modulating the osteogenic properties of osteoblast-like cells seeded on a bioactive scaffold was investigated using gremlin as a BMP antagonist. Bone-like glass-ceramic scaffolds, based on a silicate experimental bioactive glass (CEL2) developed at the Politecnico di Torino, were produced by the ...

This research has produced foamed glass-ceramics from coal fired power station furnace bottom ash (FBA) and soda-lime-silica glass. The as-received FBA was wet milled with different additions of resultant slurry dried formed into a powder. powder pressed sintered at range temperatures fluxing agent (sodium tetraborate decahydrate), bubble stabilising additive (tri-sodium phosphate) bloating (ca...

There is now a substantial body of experimental data on the pulmonary biopersistence of man-made vitreous silicate fibers (MMVSF), but human data are seriously lacking. Our knowledge in this field is essentially limited to a few reports of measurements of fibers retained in lung tissue samples taken at autopsy from workers manufacturing these products. Three types of exposure were studied: fibr...

Introduction: The purpose of the presented study was to evaluate the effect of zirconia thickness on the tensile stress of zirconia based all-ceramic restorations. Methods: Twenty zirconia disks with 10mm diameter were prepared in two groups using CAD/CAM system. The thickness of zirconia was 0.5mm in first group and 0.3mm in second group. After sintering, 0.4mm glass ceramic porcelain was appl...