In this study, 5052 Al–Mg alloy was pre-treated and friction stir processing (FSP) was then performed on the specimens to explore the deformation resistance. The experimental results indicate that the FSP specimens not only had better tensile properties but also better vibration fracture resistance. It is significant that the tensile elongation and deformation resistance tended to increase as t...

In this work, a fine-grained structure with a uniform distribution of TiB2 particles and precipitates was achieved in TiB2 particle-reinforced (PR) Al-Zn-Mg-Cu alloys by friction stir processing (FSP). The effects of multi-pass FSP on the microstructure, and TiB2 particle distribution, as well as the microstructural evolution in the following T6 treatment, were investigated by X-ray diffraction...

We report a robust and direct route to fabricate a three-dimensional nano-foam of few-layer graphene (3D-NFG) with large area coverage via a chemical vapor deposition (CVD) technique. Pyrolysis of polymer/nickel precursor film under a hydrogen environment, simply prepared by spin-coating, leads to the creation of nano-foam in the film and the reduction process of nickel ions. Carbonized-C and t...

ABSTRACT The use of a thermoelectric generator (TEG) in generating useful power from solar thermal energy is demonstrated. This device represents a portable and autonomous power generation system operating from solar power, capable of powering micro/nano systems. The TEG was integrated with a micro solar thermal collector plate to enhance the thermal radiation absorption capacity of the hot sid...

Chitosan-coated nano-liposomes containing etofenprox were prepared by ultrasonic homogenization (UH) and a combined use of UH and electro-spraying. The physicochemical properties of the resulting samples were examined and compared. The two methods yielded similar values and tendencies, except for encapsulation efficiency that differed by an average of 15%. In the coating process, as the chitosa...

ABSTARCT Encapsulation is a process of enclosing the substances within an inert material which protects from environment as well as control drug release. Recently, two type of encapsulation has been performed in several research. Nanoencapsulation is the coating of various substances within another material at sizes on the nano scale. Microencapsulation is similar to nanoencapsulation aside fro...

Nano-structured CuO-Cu2O complex thin film-based perovskite solar cells were fabricated on an indium tin oxide (ITO)-coated glass and studied. Copper (Cu) thin films with a purity of 99.995 % were deposited on an ITO-coated glass by magnetron reactive sputtering. To optimize the properties of the nano-structured CuO-Cu2O complex thin films, the deposited Cu thin films were thermally oxidized at...

Electronically conductive and electrochemically active 3D-scaffolds based on electrospun poly(ethylene terephthalate) (PET) nano-fibers are reported. Vapour phase polymerization was employed to achieve an uniform and conformal coating of poly(3,4-ethylenedioxythiophone) doped with tosylate (PEDOT:tosylate) on the nano-fibers. The PEDOT coatings had a large impact on the wettability, turning the...

In this research, the elastic behaviour of two Co thin films simultaneously deposited in an off-normal angle method was studied. Towards this end, two Si micro-cantilevers were simultaneously coated using pulsed laser deposition at an oblique angle, creating a Co nano-string surface morphology with a predetermined orientation. The selected position of each micro-cantilever during the coating pr...

The objective of the present in vitro study was to estimate the adhesion strength of nanometer crystalline hydroxyapatite (HA)-small intestine sub-mucosa (SIS) composites on model implant surfaces. Techniques of thermal denaturation (60 degrees C, 20 min) of SIS were used to enhance the adhesion strength of entheses materials to underlying implants. Specifically, results indicated that the adhe...