For high end heat exchanging applications in cryogenics and space application, compactness and effectiveness are the key factors which determine the performance of heat exchanger. Matrix heat exchanger with perforated plate heat surfaces has both criterions to suit into these applications. High thermal conductivity plate and low thermal conductivity spacers are stacked together to obtain low lo...

In air-conditioning and energy-recovery applications, heat exchangers are very important to the overall efficiency, cost, and size of the system. Current heat exchanger designs rely heavily on fin-and-tube or plate heat exchanger designs, often constructed using copper and aluminum. Recent developments in material sciencedin particular, advances in ceramics and ceramic matrix compositesdopen op...

BACKGROUND Ground source heat pumps is a building energy conservation technique. The underground buried pipe heat exchanging system of a ground source heat pump (GSHP) is the basis for the normal operation of an entire heat pump system. METHODS Computational-fluid-dynamics (CFD) numerical simulation software, ANSYS-FLUENT17.0 have been performed the calculations under the working conditions o...

Thermal response test (TRT) is an established method to determine design parameters for borehole heat exchanger (BHE) systems; borehole thermal resistance and effective ground thermal conductivity. Most commonly, these tests are performed with heat injection, using the same assumed power level as the planned BHE system. For a thorough description of TRT and current activities around the world, ...

In the presented paper two quality parameters are used to represent the state of a heat exchanger. The remaining lifetime can be estimated by trend regression. Also of interest is the uncertainty of the predicted lifetime which is determined by the confidence interval of the parameter estimation. These algorithms developed are used in this paper in an off-line evaluation of the measurements on ...

In the present study, the heat transfer coefficients of benzene in a spiral plate heat exchanger are investigated. The test section consists of a Plate of width 0.3150 m, thickness 0.001 m and Mean hydraulic diameter of 0.01 m. The mass flow rate of water (Hot fluid) is varying from 0.5 kg sec to 0.8 kg sec and the mass flow rate of benzene (cold fluid) varies from 0.4 kg sec to 0.7 kg sec. Exp...

In most domestic and commercial refrigeration systems, frost forms on the air-side surface of the air-to-refrigerant heat exchanger. Frost-tolerant designs typically employ a large fin spacing in order to delay the need for a defrost cycle. Unfortunately, this approach does not allow for a very high air-side heat transfer coefficient, and the performance of these heat exchangers is often air-si...