In the first part of two section paper, a mathematical model of the fluidized bed reactor in the presence of in-situ water adsorbent for methanol synthesis is assessed. The bubbling two-phase regime is applied to model the fluidization concept. The binary adsorbent and catalyst particles system can be separated from each other based on their density difference. The heavy catalyst particles tend...

The control of fluidized-bed operations processes is still one of the major areas of research due to the complexity of the process and the inherent nonlinearity and varying dynamics involved in its operation. There are varieties of problems in chemical engineering that can be formulated as NonLinear Programming (NLPs). The quality of the developed solution significantly affects the performance ...

 This paper presents a mathematical model of the cylindrical particle combustion in a fluidized bed reactor. This particle is composed of sewage sludge. The model performs a mathematical description of the physical and chemical phenomena that occur during particle combustion. The uniform particle model without ash accumulation is proposed. Sewage sludge is considered composed of three fractio...

Renewable hydrogen may be produced in the near term at a cost that is competitive with natural gas reforming by integrating hydrogen production with existing industrial utilization of agricultural residues. A team of government, industrial, and academic organizations is developing a steam reforming process to be demonstrated on the gaseous byproducts from a process for making activated carbon f...

The effect of the initial moisture content (X(0)) of amaranth seeds on expansion volume after popping was examined in hot air and superheated steam (SHS), using a fluidized bed system (FBS). The moisturized seeds were prepared under various vapor pressures due to various saturated salt solutions. In hot air, the maximum expansion volume was shown by seeds having X(0) of 0.16 at 260 degrees C fo...

in this research carbon nanotubes were produced by chemical vapor deposition of acetylene over a mixture of iron and cobalt catalysts supported on nanometric tio2 and the influences of two synthesis parameters: growth temperature and catalyst composition ratio on properties of end-product carbon nanotubes were investigated. the catalytic basis was prepared by wet impregnation method with differ...

a simple chemical vapor deposition technique at atmospheric pressure (apcvd) is adopted to synthesize the aligned arrays of functionalized multi-walled carbon nanotubes (amwcnts) without using any carrier gas, at 230◦c, 750◦c and 850 ◦c. camphor (c10h16o) is used as carbon source because this botanical hydrocarbon is chip and abundant which convert the cvd technique to a green method for produc...

2D Two dimensional 3D Three dimensional BEOL Back end of line BI Burn-In CMP Chemical mechanical polishing D2D Die-to-die D2W Die-to-wafer ECD Electro-chemical deposition ECG Deleted in chapter EMIB Embedded multi-die interconnect bridge FEOL Front end of line IP Intellectual property KGD Known good die KOZ Keep out zone MCM Multi chip module MCP Multi chip package MEOL Middle end of line MPM M...

In this paper design and fabrication of compact fluidized bed gasifier with increased gas – solid interaction is proposed for automotive vehicle. The aim of the design is generate a nitrogen (N2) free product gas with low tars and fines content. Firstly a compact size gasifier with fluidized bed is designed and after that it fabricated. Design was done with the help of CATIA design/modeling sof...