Flotation is, doubtless, the most important process among the various techniques used for the treatment of ore. This generalpurpose technique allows the treatment of several complex ores (lead zinc, copper zinc), sulphides (copper, lead, and zinc), oxides (hematite, quartz), oxidized minerals (malachite, cerusite) and even non-metal ores (fluorite, phosphate, coal). Due to the flotation, it is ...

abstractthe purpose of this study was to investigate the controllable operating parameters influence, including ph, solid content, collector, co-collector, and depressant dose, and conditioning time, on apatite flotation kinetics. four first order flotation kinetic models are tested on batch flotation time-recovery profiles. the results of batch flotation tests and the fitting of first-order ki...

in order to decrease the discharge from sulfide mine flotation plants, treatment and reuse approaches based on our previous wastewater monitoring experiments were explored in these plants. the flotation wastewater was collected from the case plant and was treated with coagulation sedimentation and activated carbon adsorption. then, the effluent was examined for reuse in the flotation process. f...

The concern about enhancing the productivity of Salitre phosphate mines has led to an extensive research and development program on new reagents, aimed at sustainable processing ore, with greater production concentrate and, consequently, less waste disposal in tailings dam. Flotation is most widely applied technique for rocks, using mainly fatty acids their salts as collectors. In partnership B...

Vanadium titanomagnetite (VTM) is an important mineral for developing titanium resources, but the comprehensive recovery of ilmenite separation extremely poor, resulting in low-efficiency utilization resources. Here, from VTM ore studied by combining magnetic and flotation technologies. In particular, floatability mixed MOH/PG-1 collectors thoroughly investigated. The results show that a concen...

The aim of this work was to develop a mathematical model for a continuously operating flotation tank to provide the scale-up and optimization of the separation system. The fluid dynamic of the tank was assumed to be a perfect mixture and the flotation kinetics to be a first-order reaction, as suggested by the batch operation. The experiments were carried out in a continuously operating 60 L tan...

In this work, the application of the flotation technique by dissolved air (FAD) to the treatment of milk industry effluent (milky effluent) is analyzed. Initially, batch studies were carried out in a column built of acrylic with an external diameter of 2.5 cm and 50 cm in height. Afterwards, the performance of a flotation tank with a 5.5 L capacity in the treatment of the milky effluent was add...

copper smelting slags are hard materials. therefore,to recover their copper by flotation method, grinding should be carried out to obtain optimal particle size. copper smelting slags in the bardeskan district, with work index of 16.24 kwh/st, were grinded for 65 minutes to reach an acceptable degree of freedom for the flotation tests, with particle size of 80%, smaller than 70 μm. with this gri...

This paper examines the design of comminution circuits and the issues that impact on comminution circuit efficiency. Circuit efficiency is discussed, principally from the perspective of power efficiency. However, operating efficiency, maintenance efficiency, capital expenditure and return on investment are often the key efficiency factors in project development outweighing power efficiency cons...

In this paper, the effect of ultrasonic pre-treatment and aeration on the flotation separation of chalcopyrite from pyrite was investigated at different amounts of potassium ethyl xanthate (KEX), as a collector, and pH values. Artificially-mixed samples of chalcopyrite and pyrite were subjected to flotation studies to understand the effect of aeration with or without ultrasonic tre...