To clarify the mechanism of acicular ferrite formation in low carbon submerged arc weld metals of a Ti-B system with different aluminum contents, the lattice misfit between inclusion and acicular ferrite was investigated. The inclusions were directly sliced into thin foils by a focused ion beam device and crystallographic analyses were performed using a transmission electron microscope. These i...

Recently, the grain boundary−intragranular nucleation of ferrite has received great attention seeking for the improvement of the toughness in the steel, specially when conventional austenite grain refinement techniques are not enough. This paper deals with some relevant aspects about the competitive process of allotriomorphic and idiomorphic ferrite transformations in a medium carbon vanadium-t...

Lanthanum substituted Ni-Zn ferrite nanoparticles (Ni0.5Zn0.5LaxFe1-xO4; 0.00 ≤x≤ 1.00) synthesized by sol-gel method were presented. X-ray diffraction patterns reveal the typical single phase spinel cubic ferrite structure, with the traces of secondary phase for lanthanum substituted nanocrystals. In addition, the structural analysis also demonstrates that the average crystallite size varied i...

Theoretical estimates of phase shifter performance as a function of material parameters are presented by examining the results obtained from the small perturbation model used by Button and Lax and from the fully ierrite loaded, parallel plane waveguide model used by Suhl «And Walker. The extension of Suhi's theory on nonlinear effects at high power by Fletcher and Silence is applied to relate t...

An electric current flowing around a loop produces a magnetic field and hence a magnetic flux through the loop. The ratio of the magnetic flux to the electric current is called the magnetic self-inductance. Can there be a dual situation with a magnetic current flowing around a loop and producing an electric field and hence an electric flux through the loop? Following the classical electrodynami...

Cementite dissolution in hypereutectoid steels containing Cr is analyzed using dilatometry combined with the consideration of the carbon content in the austenite. The results suggest that the austenite transformed from the mixture of ferrite and cementite can be approximated to have a carbon content corresponding to equilibrium with ferrite. The overall dissolution behavior of cementite is desc...

We report here on an efficient one-step-impregnation method to synthesize crystalline mesoporous bimetal oxides (e.g. NiFe(2)O(4), CuFe(2)O(4), Cu/CeO(2)) using mesoporous silicas as hard templates under optimized mixing conditions. This new procedure enables a true replication of the mesostructure with high yield and phase purity, while retaining particle morphology of the template.

UNLABELLED A novel conductive process for resistive random access memory cells is investigated based on nanoporous anodized aluminum oxide template. Bipolar resistive switching characteristic is clearly observed in CoFe2O4 thin film. Stable and repeatable resistive switching behavior is acquired at the same time. On the basis of conductive filament model, possible generation mechanisms for the ...

The influence of B203 on the microshucture and magnetic properties of pure Mn-Zn ferrites has been investigated. A citrate gel processing route was employed to produce highly homogeneous Mn-Zn (MQ,~,Z~.,F~,,OJ ferrites undoped or doped with B203 (0-2.5wt%). The results show that B203 doping does not benefit the magnetic properties of these femtes, but promoted grain growth significantly. The in...

The near fields originated from a small quasi-two-dimensional ferrite disk with magnetic-dipolar-mode (MDM) oscillations are the fields with broken dual (electric-magnetic) symmetry. Numerical studies show that such fields – called the magnetoelectric (ME) fields – are distinguished by the power-flow vortices and helicity parameters (E.O. Kamenetskii, R. Joffe, R. Shavit, Phys. Rev. E 87 (2013)...