Electron Beam Lithography is a well-established tool suitable for the modification of substrate surface chemistry. It therefore follows that the deposition and self-assembly of nanoparticles on a surface can be directed using this method. This work explores the effect of electron dose on the electron beam lithographic patterning of selfassembled monolayers (SAMs) on gold surfaces. Electron beam...

A new polymeric composite based on natural rubber reinforced with hemp has been processed by electron beam irradiation and characterized by several methods. The mechanical characteristics: gel fraction, crosslink density, water uptake, swelling parameters, and FTIR of natural rubber/hemp fiber composites have been investigated as a function of the hemp content and absorbed dose. Physical and me...

Materials designed for nuclear reactors undergo microstructural changes resulting from a combination of several environmental factors, including neutron irradiation damage, gas accumulation and elevated temperatures. Typical ion beam irradiation experiments designed for simulating a neutron irradiation environment involve irradiating the sample with a single ion beam and subsequent characteriza...

This study investigated the feasibility of using an electron beam (EB) process to cure chemically impregnated wood products. Maple wood planks were impregnated with the low-viscosity resins 1,6 hexanediol dimethacrylate (HDDA) and trimethylolpropane trimethacrylate (TMPTA). The addition of nanoparticles into the formulation was also studied. The impregnated wood was then cured by EB irradiation...

InN films grown by molecular beam epitaxy have been subjected to 2 MeV He + irradiation followed by thermal annealing. Theoretical analysis of the electron mobilities shows that thermal annealing removes triply charged donor defects, creating films with electron mobilities approaching those predicted for uncompensated, singly charged donors. Optimum thermal annealing of irradiated InN can be us...

this study was conducted to investigate the effects of doses of 25, 50 and 75 kgy of gamma ray (gr) and electron beam (eb) ionizing radiations on ruminal disappearance of amino acids (aas) and protein subunits of canola meal (cm). the nylon bag technique was used for degradability trial. three ruminally fistulated taleshi bulls were used for this aim. the disappearance trends of protein subunit...

Nickel nanorods encapsulated inside the multiwalled carbon nanotubes were prepared using microwave plasma chemical vapor deposition (MPCVD) technique. The as prepared tubes were investigated by scanning electron microcopy (SEM), x-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). HRTEM study of these tubes exhibits long, good crystalline nickel filled CNTs with...

Samples from Cellulose triacetate (CTA) sheets were irradiated with electron beam in the dose range 10–200 kGy. Non-isothermal studies were carried out using thermogravimetric analysis (TGA) to obtain the activation energy of thermal decomposition for CTA polymer. The CTA samples decompose in one main break down stage. The results indicate that the irradiation by electron beam in the dose range...

The AAPM TG 39 protocol has proposed three different methods of calibrating plane-parallel ionization chambers, i.e., in-phantom irradiation with a high-energy electron beam and in-phantom and in-air 60Co irradiation. To verify the consistency of the three methods, we have measured Ngaspp values using each of these techniques for the five most commonly used plane-parallel chambers considered by...