In the long-term performance of the temporomandibular joint (TMJ) implant, wear and durability must be considered. Thus retrieved and laboratory test implants were examined both optically and in a scanning electron microscope (SEM). In laboratory testing, the volumetric wear of metal-on-metal was about an 10x order of magnitude less than that of metal-onacrylic TMJ implants. This metal-on-metal...

The aim of this in vitro study was to investigate the wear behavior of the abrader when tetragonal zirconia polycrystal (TZP), cp-titanium (CpTi) and Ti-6Al-4V alloy (TiAlV) were used as the antagonist on fixed dental prostheses (FDPs). Both hemisphere abrader and flat substrate specimens were prepared using TZP, CpTi and TiAlV. Two-body wear tests were performed in distilled water, and the wea...

Fuel cells have the potential to provide environmentally-friendly sources of energy for transportation, portable, and stationary applications. Because fuel cells convert chemical energy directly to electrical energy, high efficiencies can be realized. Production of electrical power from fuel cells has several other advantages. There are no moving parts. Fuel cells operate noiselessly with no fr...

The average life span of knee prosthesis used in Total Knee Replacement (TKR) is approximately 10 to 15 years. Literature indicates that the reasons for implant failures include wear, infection, instability, and stiffness. However, the majority of failures are due to wear and tear of the prosthesis. The most common biopolymer used in TKR  is Ultra High Molecular Weight Polyethylene (UHMWPE). Pr...

Introduction: Experimental wear testing is well-established as an important part of the TKR design process. Recently, in-silico models have proved their value to corroborate long-term in-vitro results on a much shorter timescale [1]. Both FE-based models & multi-body dynamics can be used to predict contact pressures, sliding distances and cross-shear (CS). The precise mechanisms of wear are not...

Information about food ingestion and mastication behavior during the lifespan of an individual is encoded in the dental occlusal wear pattern. To decode this information, we describe a new method called occlusal fingerprint analysis (OFA). Structural parameters of wear facets on the occlusal surface of teeth are quantified from digitized casts for the interpretation of occlusal aspects. The OFA...

in the past 30 years, electroless nickel (en) plating has grown to such proportions that these coatingsand their applications are now found underground, in outer space, and in a myriad of areas inbetween. moreover, in order to further improve the mechanical and tribological properties of thenickel-phosphorous (ni-p) coatings, ni-p/ptfe composite coatings can be obtained, which provideseven grea...

Aseptic loosening attributed to wear debris mediated osteolyses is the major concern in hip arthroplasty. Modern highly cross linked polyethylene reduces wear by > 90% in vitro, seemingly without major disadvantages. It has however not yet been subjected to extensive in clinical testing with high accuracy methods. Since the in vivo wear situation is complex and lab results earlier have made inc...

Abstract The marine engine is one of the core devices ship. With continuous progress science and technology, engines are developing towards high power density, related tribological problems more prominent. As most typical friction pairs engines, crankshaft-bearing bush bears loads presents a trend increased wear. By studying wear behavior bearing bush, it possible to deeply grasp mechanism, spe...

The objective of this study was to examine total knee polyethylene inserts from in vitro simulation to evaluate and display-using a 3D optical scanner-wear patterns and wear rates of inserts exposed to wear by means of simulators. Various sets of tibial inserts have been reconstructed by using optical scanners. With this in mind, the wear behavior of fixed and mobile bearing polyethylene knee c...