Selection of operating wavelength of the Yb-doped fiber-ring lasers using longperiod fiber gratings (LPFGs) is suggested. In the proposed method, customized LPFG that sustains high powers serves as a broad-band rejection filter. It modifies the net gain profile of the laser, enabling the peak gain to occur at a designed wavelength. Spectral range of oscillation between 1050-1110 nm was experime...

This paper describes a new approach to amplify optical images by using optically pumped doped cores in a multi-core optical fiber structure. This approach combines the high gain and high efficiency properties of cladding pumped optical amplifiers with the imaging properties of coherent fiber bundles. The individual cores correspond to the pixels in the image amplifier. We have demonstrated 3x3 ...

In this paper, a 50 Km remote and switchable fiber optic sensing system based on an erbium doped fiber ring laser is proposed. The system allows the integration of different interrogation methods based on the detection of wavelength or amplitude variations of the laser. This integration is carried out by sequentially activating different ring cavities by using an optical switch. With this schem...

A dual-wavelength erbium fiber laser with single-longitudinal-mode characteristic is proposed and demonstrated. The system uses a 7-m-long highly doped erbium-doped fiber as the primary gain medium while two fiber Bragg gratings (FBGs) act as a wavelength selection mechanism. The sensing capability of the FBGs gives this source the possibility to be also used in a dual-sensor multiplexing schem...

Applying an inversing method and a genetic algorithm, two radial distributions, i.e., a core graded-index and erbium-doped concentration, are optimized for an erbium-doped fiber amplifier (EDFA) in a two-level model under single-mode condition and weakly guided approximations. There is evidence to show that the core graded-index has obvious influence on the gain bandwidth of the EDFA, and simil...

An S-band gain-clamped erbium-doped fiber amplifier module, employing a fiber Bragg grating to serve as a reflected element for lasing a saturated tone injected into the module by forward optical feedback method, is proposed and investigated experimentally. Moreover, the performance and behavior of the gain and noise figure in the proposed gain-clamped S-band fiber amplifier have also been disc...

The recovery of the self-frequency shift effect on a soliton by optical phase conjugation is investigated. It is proved that, without third-order dispersion and fiber loss, the soliton self-frequency shift can be completely recovered. The recoveries for a fundamental soliton and a second-order soliton in the presence of third-order dispersion and of fiber loss, which is compensated by the distr...

We investigated the polarization characteristics of a mode-locked fiber laser gyroscope (MLPLG) formed with a Nd-doped fiber as an optical gain medium and a Sagnac loop mirror. The output pulse patterns and the polarization states were found to be determined by fiber birefringence in the different sections of the MLPLG. We describe the conditions for the MLPLG to operate with automatic reciproc...

In the paper, a 3 µm mid-infrared (MIR) high energy ultrafast Er:ZBLAN fiber laser and amplification system is presented. The 3µm seed pulses were generated through an Yb-doped ultrafast fiber laser pumped optical parametric amplification (OPA). A pulse energy of 12.4 µJ is generated at a repetition rate of 100 kHz with a pulse duration of 103 fs. A Er:ZBLAN fiber amplifier was used to further ...

We report what is to our knowledge the first photochemical fabrication of a long-period grating in a pure-fused-silica photonic crystal fiber. The inscription technique is based on a two-photon absorption mechanism and does not require a specially designed photonic crystal fiber with a photosensitive Ge-doped core. The characteristic fluence value for the inscription is an order of magnitude le...