Batch scale activated sludge kinetic studies were undertaken for the treatment of pet food wastewater characterized by oil and grease concentrations of up to 21,500 mg/L, COD and BOD concentrations of 75,000 and 60,000 mg/L, respectively as well as effluent from the batch dissolved air flotation (DAF) system. The conducted kinetics studies showed that Haldane Model fit the substrates and biomas...

The corrosion rate of steel plate using single-factor, multifactor, and complex water systems was investigated via refinery wastewater effluents used as circulating cooling water. The results show that the primary corrosion factors of steel depend on the characteristics of the ions, the formation of the oxidized coating, the diffusion of dissolved oxygen, and other complex factors, although ion...

Treatment of wastewater from a tannery in Greater Ho Chi Minh City (Vietnam) was investigated on a pilot scale. After pre-treatment by the tannery that included batch-coagulation and sedimentation, the wastewater was treated by dissolved air flotation, a membrane bioreactor (MBR) and granular activated carbon (GAC) for polishing the MBR effluent. The average removal efficiency for organic subst...

The enrichment of polymetallic sulfide ore is a complex task. Fine grinding carried out to reveal useful minerals, resulting in the formation microparticles. It difficult achieve floatation microparticles and fine minerals are lost with flotation tailings. problem microparticle can be solved by using air bubbles smaller than 50 µmin for process. Water-air microemulsion (WAME)of frothersolution ...

Harmful Algal Blooms (HABs) are considered a major contributor to membrane biofouling in Seawater Reverse Osmosis (SWRO) desalination plants. The presence of HABs the raw feed water leads an increase fouling rate, chemical consumption, and can cause temporary shutdown Effective pretreatment reduce amount organic foulants reaching RO alleviate problem flux decline during operation frequent clean...

Cryogenic scanning electron microscopy (cryo-SEM), image analysis (IA) of SEM micrographs and X-ray microtomography (XMT) were used to obtain new information about the morphology of iron ore green pellets in this work. Cryo-SEM and freeze fracturing was used to observe entrapped air bubbles and arrangement of particles around the bubbles and in the matrix of wet green pellets. The observations ...

Life cycle assessment (LCA) is an attractive approach to implement the waste management system in terms of environmental sustainability. The variety options has been made emergence requirement a methodology choose best for decision-makers. This paper aims generate comprehensive model facilitate life products develop cleaner production strategy manufacture. In first step, and adopting models are...

Flotation in the mining industry is a very significant separation technique. It known that fine and ultra-fine particles are difficult to float, leading losses of valuable minerals, mainly due their low collision efficiency with bubbles. can be enhanced either by increasing apparent particle size or decreasing bubble size. Literature review reveals electroflotation resulted higher recoveries ul...