Drilling of carbon fibre/epoxy laminates is usually carried out using standard drills. However, it is necessary to adapt the processes and/or tooling as the risk of delamination, or other damages, is high. These problems can affect mechanical properties of produced parts, therefore, lower reliability. Production of higher quality holes is a challenge to everyone related with composites industry...

Veneering ceramics designed to be used with modern zirconia framework restorations have been reported to fracture occasionally in vivo. The fracture toughness of such veneering ceramics was measured and compared to that of conventional feldspathic porcelain veneering ceramics for metal framework restorations. The fracture toughness of the leucite free veneer was measured to be 0.73 MPa m ± 0.02...

Abstract Low mechanical resistance and high weight restrict use of natural stones in applications where tensile or flexural capacity is required together with a low weight, such as for long spans or thin sections (e.g., cladding, countertops, desktops). The use of composite laminates as external reinforcement both to increase the mechanical resistance and to decrease weight of natural stone is ...

All-ceramic fixed dental prostheses (FDPs) tend to fracture at the connector regions due high stress concentration these areas influenced by their design. This study was performed as an adjunct existing clinical evaluate influence of different radii curvature gingival embrasure on distribution a three-unit all-ceramic implanted supported FDP. Three three-dimensional (3D) models were created sca...

Introduction: This study was designed to observe the success of three quarter crown over conventional full veneer crown in the posterior teeth (premolars and molars) where there has been considerable destruction of tooth structure but with the buccal surface remaining intact. Method: A total number of 30 patients were studied. Among which 15 patients were treated with three quarter crown and re...

A study is made of veneer failure by cracking in all-ceramic crown-like layer structures. Model trilayers consisting of a 1 mm thick external glass layer (veneer) joined to a 0.5 mm thick inner stiff and hard ceramic support layer (core) by epoxy bonding or by fusion are fabricated for testing. The resulting bilayers are then glued to a thick compliant polycarbonate slab to simulate a dentin ba...

STATEMENT OF PROBLEM Bonded porcelain veneers are widely used esthetic restorations. Although high success and survival rates have been reported, failures occur. Fracture is the most common failure mode. Fractures range from incomplete cracks to the catastrophic. Minimally invasive or thin partial veneers have gained popularity. PURPOSE The aim of this study was to measure the influences of p...

Effects of drying temperature and artificial UV irradiation on the pH of veneer surfaces, water absorption, thickness swelling, as well as shear strength of plywood manufactured from untreated and treated veneer sheets were evaluated. Rotary cut veneer sheets from beech (Fagus orientalis Lipsky) log were selected. The veneer sheets were dried at either 100C or 180C after peeling. Then the sur...

A study was undertaken to evaluate the effect of artificial aging through steam and thermal treatment as influencing the shear bond strength between three different commercially available zirconia core materials, namely, Upcera, Ziecon, and Cercon, layered with VITA VM9 veneering ceramic using Universal Testing Machine. The mode of failure between zirconia and ceramic was further analyzed as ad...

The heat produced during tooth preparation could be a source of damage for dental pulp, and many variables are involved in this process. aim vitro study was to evaluate whether the different degrees wear diamond burs significantly influenced temperature changes pulp chamber tangential veneer preparation. sample comprised 30 intact permanent monoradicular teeth, randomly assigned three groups 10...