The present investigation studies the behavior of steady flow of visco-elastic liquid between two porous coaxial circular cylinders, where both the cylinders are rotating with different uniform angular velocities about the common axis. In addition, the inner cylinder has uniform velocity along the axis and the visco-elastic fluid, which is a Walters liquid B′, is allowed to flow in the annulus....

The interaction between an initially laminar boundary layer developed spatially on a flat plate under the influence of vortex shedding induced from a rotating circular cylinder has been simulated numerically. The rotational speed of the cylinder is varied to generate the vortex shedding of different intensities. Also the flat plate is kept at different positions from the cylinder. Due to asymme...

The objective of this study is to develop a method of controlling vortex shedding behind a bluff body using control theory. A suboptimal feedback control procedure for local sensing and local actuation is developed and applied to the flow behind a circular cylinder. The location of sensors for feedback is limited to the cylinder surface and the control input from actuators is the blowing and su...

the objective of this work was to develop a new design of an intake manifold through a 1d simulation. it is quite familiar that a duly designed intake manifold is essential for the optimal performance of an internal combustion engine. air flow inside the intake manifold is one of the important factors, which governs the engine performance and emissions. hence the flow phenomenon inside the inta...

A deoxyribonucleic acid (DNA) solution was placed in the gap (1 mm) between two coaxial cylinders; the inside diameter of the outer cylinder was 12 mm, and the outside diameter of the inner cylinder was 10 mm. When the inside cylinder was rotated at 2500 revolutions per minute, a sufficiently large velocity gradient of the liquid flow was produced across the gap so that the DNA molecules were o...

Effect of time dependent normal transpiration on the problem of unsteady viscous flow and heat transfer in the vicinity of an axisymmetric stagnation point of an infinite circular cylinder moving simultaneously with time-depended angular and axial velocities and with time-dependent wall temperature or wall heat flux are investigated. The impinging free stream is steady with a strain rate . A re...

Motivated by closed-loop flow control applications, a new formulation of the proper orthogonal decomposition (POD) is presented which is capable of characterizing not only the controlled and natural states of a given flow but also the transient behavior between these states. This approach, which is termed temporal POD (TPOD) extracts the optimum frameof-reference and the temporal information re...

An incompressible liquid flow in the gap between two coaxial cylinders, such that the inner rotating (wavy) cylinder has a periodically varying radius along the axial direction while the outer stationary cylinder has a constant radius, is studied experimentally and theoretically. The basic attention is focused on the symmetry-breaking phenomenon of the vortex flow arising from the rotation of t...

The direct numerical simulation (DNS) of unsteady flow past a square-cylinder has a very high computational cost, even at moderately low Reynolds-numbers (Re), where the transition to a complex 3D wake occurs. In fact, the cylinder wake is unstable to two main spanwise disturbances that are referred to as “Mode A” and “Mode B” in the literature, similarly to what happens for circular cylinders....