The grain boundary structure is usually described by the coincidence site lattice (CSL) model based on the misorientation of adjoining crystals. Therefore, the objective of the present investigation is to seek the correlation between CSL fraction and creep resistance of modified 9Cr–1Mo steel (P91) with and without boron addition. Results showed that CSL fraction increases with increase in heat...

Nanoindentation of cellulose diacetate-graft-poly(lactide)s (CDA-g-PLLAs) synthesized by ring opening graft copolymerization of L-lactide in bulk onto the residual hydroxyl positions on CDA were conducted to investigate the effect of the molecular composition and thermal aging on mechanical properties and creep behavior. Continuous stiffness measurement (CSM) technique was used to obtained hard...

We studied the elastic moduli, ductile creep behavior, and brittle strength of shale-gas reservoir rocks from Barnett, Haynesville, Eagle Ford, and Fort St. John shale in a series of triaxial laboratory experiments. We found a strong correlation between the shale compositions, in particular, the volume of clay plus kerogen and intact rock strength, frictional strength, and viscoplastic creep. V...

Background—Creep-fatigue behavior is identified as the incorporated effects of fatigue and creep. One class of constitutive-based models attempts to evaluate creep and fatigue separately, but the interaction of fatigue and creep is neglected. Other models treat the damage as a single component, but the complex numerical structures that result are inconvenient for engineering application. The mo...

Gamma titanium aluminides (γ-TiAl) display significantly improved high temperature mechanical properties over conventional titanium alloys. Due to their low densities, these alloys are increasingly becoming strong candidates to replace nickel-base superalloys in future gas turbine aeroengine components. To determine the safe operating life of such components, a good understanding of their creep...

The prediction of long-term deformations of concrete and reinforced concrete structures has been a field of extensive research and several different creep models have been developed so far. Most of the models were developed for constant concrete stresses, thus, in case of varying stresses a specific superposition principle or time-integration, respectively, is necessary. Nowadays, when modeling...

Creep polycrystalline ice samples antifreeze glycopeptides re-accelerating or tertiary samples. Previous work grain-boundary migration consistent with this, as nucleation and growth of curves containing (AFGPs) creep that has shown obtained from the low concentrations of do not show the is found in pure ice that AFGPs inhibit in ice and the present results are tertiary creep is associated with ...

The tensile creep and creep-recovery behaviour of a unidirectional SiC fibre-Si3N4 matrix composite was analysed using finite element techniques. The analysis, based on the elastic and creep properties of each constituent, considered the influence of fibre-matrix bonding and processing-related residual stresses on creep and creep-recovery behaviour. Both twoand threedimensional finite element m...

In-situ neutron diffraction measurements were performed on monocrystalline samples of the Ni-based superalloy CMSX-4 during N-type g0 raft formation under the tensile creep conditions of 1150 C/ 100 MPa, and subsequently on a rafted sample under the low temperature/high stress creep conditions of 715 C/825 MPa. During 1150 C/100 MPa creep, the g0 volume fraction decreased from ~70% to ~50%, the...

In Exp. 1, 54 sows (PIC Line 1050) and their litters were used to determine the effects of creep feeding duration on the proportion of pigs consuming creep feed and preweaning performance. Two groups of sows were blocked according to parity and date of farrowing and allotted to 3 experimental treatments in a randomized complete block design. Creep feeding was initiated at d 7, 14, and 18 from b...