Five out of six functioning creepmeters on southern California faults recorded slip triggered at the time of some or all of the three largest events of the 1992 Landers earthquake sequence. Digital creep data indicate that dextral slip was triggered within 1 min of each mainshock and that maximum slip velocities occurred 2 to 3 min later. The duration of triggered slip events ranged from a few ...

This research aims to explore the dynamic characteristics and settlement prediction of soft soil. Accordingly, the dynamic shear modulus formula considering the vibration frequency was utilized and the dynamic triaxial test conducted to verify the validity of the formula. Subsequently, the formula was applied to the dynamic creep strain function, with the factors influencing the improved dynami...

The paper presents a comprehensive computational and experimental study of the crack growth rate during creep-fatigue interaction in compact specimens P2M steel at temperature 550 °C. theoretical part consisted formulation fracture resistance parameters through classical new constitutive equations cracked body state taking into account accumulation damage. Numerical calculations included determ...

background recently, assessment of the atrial motion and deformation indices obtained via doppler myocardial imaging (dmi) has been proposed as a new method of exploring the atrial function. objective our aim was to assess the right atrial (ra) regional function using myocardial velocities, strain, and strain rate imaging (sri) and compare it with the function of the inter-atrial septum (ias) a...

Accurate predictions of the amount and the rate of long- term deformation of reinforced soils under an applied load are important key issue in geotechnical engineering, in which the deformation of soil develops with time at a state of constant effective stress. Since geosynthetic is generally considered creep sensitive therefore, evaluation of creep behavior of geosynthetic reinforced soil (GRS...

The previously developed microprestress-solidification theory for concrete creep and shrinkage is generalized for the effect of temperature ~not exceeding 100°C!. The solidification model separates the viscoelasticity of the solid constituent, the cement gel, from the chemical aging of material caused by solidification of cement and characterized by the growth of volume fraction of hydration pr...

In order to investigate the effect of applied stress on mechanical properties in metallic glasses, nanoindentation tests were conducted on elastically bent Zr-Cu-Ag-Al metallic glasses with two different structure states. From spherical P-h curves, elastic modulus was found to be independent on applied stress. Hardness decreased by ~8% and ~14% with the application of 1.5% tensile strain for as...

A method utilizing expansion of a diaphragm-type film specimen was developed to study in vitro biodegradation of poly(etherurethane urea) (PEUU) under conditions of dynamic loading (fatigue). A finite element model was used to describe the strain state, which ranged from uniaxial at the edges of the film to balanced biaxial tensile strain at the center. During testing, the film was exposed to a...

We report on studies of the dwell fatigue crack growth (FCG) behavior commercial pure titanium (CP-Ti) TA2 weld joints at 25 °C and 200 °C. Taking into account effects load ratio temperature, impact FCG associated fracture mechanism are clearly demonstrated. Meanwhile, in order to illustrate creep–fatigue interaction, finite element simulations also performed analyze evolution stress strain fie...

Abstract Creep behavior is susceptible to uncertainty. Replicated creep data for steel can exhibit logarithm decades of uncertainty, which necessitates the development probabilistic models reliability‐based design. The deterministic Wilshire – Cano Stewart (WCS) model transformed into a deformation, damage, and rupture prediction via injecting uncertainty test conditions, pre‐existing material ...