introduction: nano-indentation has recently been employed as a powerful tool for determining the mechanical properties of biological tissues on nano and micro scales. a majority of soft biological tissues such as ligaments and tendons exhibit viscoelastic or time-dependent behaviors. the constitutive characterization of soft tissues is among very important subjects in clinical medicine and espe...

Samples of submicron WC-Co-Re cemented carbide were produced and examined by different techniques. The microstructure the samples is fine extremely uniform indicating strong inhibiting effect Re with respect to WC grain growth during liquid-phase sintering. Results examination hot hardness at a temperature 500°C provide evidence for significantly higher value in comparison that conventional WC-...

Time dependent plastic deformation in metals can occur at high temperatures. Typically the creep test is conducted to characterize the deformation features; however, the conventional uniaxial power-law creep test may be impractical for small scale materials. Accordingly, instrumented indentation techniques are frequently employed. This study concerns the employment of instrumented indentation t...

The uniaxial compression-creep behavior of unidirectionally reinforced continuous-fiber composite materials was investigated for the case where both the matrix and the fiber underwent plastic deformation by creep. The creep behavior of NiAl composites reinforced with 5 to 20 vol pct tungsten fibers was characterized at 1025 8C. The NiAl-W composites exhibited a three-stage creep behavior, with ...

Low cycle fatigue–creep is the main reason for the failures of many engineering components under high temperature and cyclic loading. Based on the exhaustion of the static toughness and dissipation of the plastic strain energy during fatigue failure, a new low cycle fatigue–creep life prediction model that is consistent with the fatigue–creep damage mechanism and sensitive to the fatigue damage...

A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section typ...

Two Ti2AlNb intermetallic orthorhombic (O) alloys, Ti-15Al-33Nb and Ti-21Al29Nb(at.%), were subtransus processed into sheets, using pancake forging and hot-pack rolling, and evaluated in tension (25 and 650°C) and creep (650-710°C) and the properties and deformation behavior were related to microstructure. Some of the microstructural features evaluated were grain boundary character, grain size,...

Diffusion-controlled-creep processes are used to assess the creep behavior of dispersion and solute hardened materials at coarse and fine grain sizes. It is shown that the creep behavior of a dispersion strengthened (DS) Al–Mg alloy is similar to the creep behavior of pure Al–Mg alloys. Both materials show dislocation climb and dislocation solute-drag contributions to creep. It is shown that th...

A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section typ...