For a variety of superconducting qubits, tunable interactions are achieved through mutual inductive coupling to a coupler circuit containing a nonlinear Josephson element. In this paper, we derive the general interaction mediated by such a circuit under the Born-Oppenheimer approximation. This interaction naturally decomposes into a classical part, with origin in the classical circuit equations...

Coupled-mode equations for an asymmetric fibre-to-planar optical coupling system, incorporated a grating structure are presented. A grating-assisted coupling coefficient is described. When the parameters of the coupler are such that there is no phase synchronism between the fibre and the slab modes, the grating enhances the coupling in both the resultant amplitude and phase modulation. However,...

The imbalance and excess loss in multimode interference couplers with fabrication errors are examined. Remarkably, there exists a number of optimum access waveguide widths which give a minimum imbalance. Furthermore, quite low excess loss can be simultaneously achieved by choosing one particular optimum width. It is also shown that paired interference couplers have better imbalance performance ...

The FNAL 9-cell 3.9GHz deflecting mode cavity designed for the CKM experiment was chosen as the baseline design for the ILC BDS crab cavity. The full 9cell CKM cavity including the coupler end-groups was simulated using the parallel eigensolver Omega3P and scattering parameter solver S3P. It was found that both the notch filters for the HOM/LOM couplers are very sensitive to the notch gap, whic...

We propose a novel grating coupler design which is inherently reflectionles by focusing the reflecte light away from the entrance waveguide. The design rules for this reflectionles grating coupler are explained and the grating coupler design is investigated by means of 3D FDTD simulations for the case of a Silicon-on-Insulator based platform. References and links 1. D. Taillaert, W. Bogaerts, P...

Coupling numerical models, i.e. implementing synchronized exchanges of information between models, is a central issue in many research fields such as climate modelling, data assimilation, or computational fluid dynamics. Since about 15 years, CERFACS specializes in developing coupling software tools, also called “couplers”. In 1991, CERFACS was commissioned to develop a software interface to co...

The fiber loop mirror based on a ring configuration is one of the devices in optical fibers most used in communications and sensors (Mortimore, 1988). The device is formed when the two output ports of a directional coupler are spliced. In this configuration, the two waves at the coupler outputs travel in opposite directions but following the same optical paths in an optical fiber ring, which as...

Introduction: With the increasing variety of commercial wireless applications, there is now a requirement to incorporate several transceivers into a single hardware device [1]. To achieve high integration and minimise costs, it is an advantage to design transceivers that can be reconfigured for different frequency bands or share common blocks, rather than implementing the transceivers separatel...

A three-step molding softlithographic process has been developed for the construction of a sharp Y-junction structure formation in a 1 × 2 Y-branch plastic optical fiber (POF) coupler design. The 1×2 Y-branch POF coupler is based on a Y-junction splitter which requires that the splitting part is constructed with sharp infinitesimal junction. The softlithographic process enables a PDMS mold to b...

in this article, we suggested a novel design of polarization splitter based on coupler waveguide on inp substrate at 1.55mm wavelength. photonic crystal structure is consisted of two dimensional (2d) air holes embedded in inp/ingaasp material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. the photonic band gap (pbg) of this structure is determined using t...