mixtures of mineral aggregate and modified sulfur, wherein the modified sulfur functions as a binder, are termed sulfur concretes or sulfur mortars depending on the form of the mineral aggregate. molten sulfur reacted with olefinic additive, at 130-140 ºc, and then mixed with preheated filler and aggregates. sulfur mortar samples were prepared by mixing 32 % molten sulfur, 10 % filler and 58 % ...

Given the continued challenge of dispersion, for practical purposes, it is of interest to evaluate the impact of multi-walled carbon nanotubes (MWCNTs) at different states of clustering on the eventual performance properties of cement paste. This study evaluated the clustering of MWCNTs and the resultant effect on the mechanical and electrical properties when incorporated into cement paste. Cem...

Self-Compacting Concrete Originally developed in Japan, SCC technology was made possible by the much earlier development of Superplasticisers for concrete. To compare the performance of SCC with Fly Ash 20%, Silica Fume 10%, Rice Husk Ash (5%, 10%, and 15%) as a partial replacement of cement, due to the high increase in construction which has brought a heavy demand for ingredients of concrete s...

The available literature identifies that the addition of mineral admixture as partial replacement of cement improves the microstructure of the concrete (i.e., porosity and pore size distribution) as well as increasing the mechanical characteristics such as drying shrinkage and creep, compressive strength, tensile strength, flexural strength, and modulus of elasticity; however, no single documen...

Cortical bone, found in the central part of long bones like femur, is known to adapt to local mechanical stresses. This adaptation has been linked exclusively with Haversian remodelling involving bone resorption and formation of secondary osteons. Compared to primary/plexiform bone, the Haversian bone has lower stiffness, fatigue strength and fracture toughness, raising the question why nature ...

Reinforced concrete pipe (RCP) has been one of the most common pipes for medium to large diameter utility systems including sanitary sewer, and storm drainage systems. RCP typically has superior structural properties combining high compressive strength from concrete and tensile strength from reinforced steel. RCP tends to deteriorate over time due to hydrogen sulfide (H2S) gas in sewage and man...

Mechanical behaviour of old masonry may differ from the theoretical one to a great extent, hence it needs to be properly evaluated for quantifying the safety and serviceability of real structures, in view of their rehabilitation and/or seismic reliability assessment. Among the factors affecting such behaviour, the presence of moisture, mainly from rising damp, plays a key role in the deteriorat...

I~VESTI~ATION OF MODES OF THERMAL FRACTURE OF SOME BRITTLE MATERIALS by CHARLES R. NELSON Submitted to the De~artment of Civil Engineering on September 2, 1969, in partial fulfillment of the requirements for the degree of Doctor of Philosophy. An analysis of the temperatures and the thermal stresses in a detailed and accurate manner with the finite element technique resulted in the following ad...

The present investigation deals with effect of bentonite clay on concrete. The concrete was produced by partial replacement of OPC with mineral admixture bentonite clay in percentages of 0%, 5%, 10%, 15% and 20%. The M20 grade of concrete was designed. The compressive strength, split tensile strength and flexural strength were found for the specimens. The present investigation is to study the e...

In the present study, room temperature mechanical properties of pure magnesium, Mg/ZrO₂ and Mg/(ZrO₂ + Cu) composites with various compositions are investigated. Results revealed that the use of hybrid (ZrO₂ + Cu) reinforcements in Mg led to enhanced mechanical properties when compared to that of single reinforcement (ZrO₂). Marginal reduction in mechanical properties of Mg/ZrO₂ composites were...