We propose a method to enhance the fuel cell efficiency with the simultaneous removal of toxic heavy metal ions. Carbon monoxide (CO), an intermediate of methanol oxidation that is primarily responsible for Pt catalyst deactivation, can be used as an in-situ reducing agent for hexavalent chromium (Cr (VI)) with reactivating the CO-poisoned Pt catalyst. Using electro-oxidation measurements, the ...

The mimic of hydrogenases has unleashed a myriad of bifunctional catalysts, which are widely used in the catalytic hydrogenation of polar multiple bonds. With respect to ancillary ligands, the bifunctional mechanism is generally considered to proceed via the metal-ligand cooperation transition state. Inspired by the interesting study conducted by Hanson et al. (Chem Commun., 2013, 49, 10151), w...

Silicon microreactors with thin-film wall catalyst were adopted for kinetic studies of CO preferential oxidation (PrOx). The activity of this catalyst was compared to other catalyst systems based on similar formulation. Internal and external mass transport and heat transport limitations of the microreactor were examined and comparisons were made to typical packed-bed lab reactors (m-PBR's). We ...

The Mo-based polyoxometalates containing mono- and dicobalt(III) catalyst cores, [CoMo(6)O(24)H(6)](3-) and [Co(2)Mo(10)O(38)H(4)](6-), were found to serve as O(2)-evolving catalysts in a system consisting of tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)(3)(2+)) and sodium persulfate (S(2)O) in an aqueous borate buffer solution at pH 8.0. Kinetics of O(2) evolution reveals that the higher cobalt ...

The use of Cs0.5H0.5PW12O40 insoluble salt as a superacid promoter in the catalyst layer of a polymer electrolyte membrane fuel cell (PEMFC) has been investigated. An increase of performance has been recorded at intermediate temperatures (110–130 °C) and under low relative humidity (R.H.). The promoter appears to mitigate the ionomer dry-out effects in the catalytic layer and produces an increa...

A weak surface modification is applied to Co/SiO2 catalyst by hydrothermal treatment at 180°C for 5 h. Aluminum is introduced to Co/SiO2 catalysts during the surface modification. The effects of surface modification on Co/SiO2 catalyst are studied by changing the operating sequences of surface modification and cobalt impregnation in the catalyst preparation. Surface modification before cobalt i...

Metal-organic frameworks (MOFs) derived Co-based catalysts have received extensive attention in the chemoselective hydrogenation of nitroarenes, while they usually require a lot solvent during synthesis and identification active species. This study explores solid-phase strategy to obtain MOF precursors without using any solvent, which is then foamed pyrolyzed synthesize Co@NC-X catalyst. It was...

A new heterogeneous catalyst for CO(2) activation was identified in the Cr(II)/SiO(2) Phillips catalyst, one of the most important catalysts used industrially for olefin polymerization. Interestingly, it was found that Cr(II)/SiO(2) strongly activates CO(2) already at room temperature, making it available for chemicals synthesis. A preliminary attempt in this direction was done by following the...

Gasification of pyrolysis oil was studied in a fluidized bed over a wide temperature range (523-914 °C) with and without the use of nickel-based catalysts. Noncatalytically, a typical fuel gas was produced. Both a special designed fluid bed catalyst and a crushed commercial fixed bed catalyst showed an initial activity for syngas (H2 and CO) production at T >700 °C. However, these catalysts los...

We present the magnetic properties of silica-supported metal (Fe,catalyst) nanoparticles synthesized by precipitation of metal nitrate in ammonia-based medium. Our goal is the study of possible metal-support interactions in the nanoporous catalyst. The temperature dependence of the magnetization for all samples display spin-glass like behavior below c.a. 11-12 K, with clear Curie-Weiss dependen...