A metre-length flexible hollow glass fibre with 20 µm-bore and 1.5 mm-cladding diameters for transporting a synchrotron X-ray beam and controlling the trajectory has been examined. The large cladding diameter maintains a moderate curvature to satisfy the shallow glancing angle of total reflection. The observed transmission efficiency was more than 20% at 12.4 keV. As a demonstration, a wide-are...

We theoretically analyze gain guiding in large-core Bragg fibers, to be used for large-mode-area laser amplifiers with single-transverse-mode operation. The signal is gain-guided in a low-index core, whereas the pump is guided by the photonic bandgap of the Bragg cladding to achieve good confinement. The high-index layers in the Bragg cladding are half-wave thick at the signal wavelength in ord...

Two-dimensional simulations of steady natural convection and radiation heat transfer for a 14x14 pressurized water reactor (PWR) spent nuclear fuel assembly within a square basket tube of a typical transport package were conducted using a commercial computational fluid dynamics package. The assembly is composed of 176 heat generating fuel rods and 5 larger guide tubes. The maximum cladding temp...

The development of robust infrared fibers is crucial for harnessing the capabilities of new mid-infrared lasers. We present a novel approach to the fabrication of chalcogenide glass fiber preforms: one-step multimaterial extrusion. The preform consists of a glass core and cladding surrounded by a built-in, thermally compatible, polymer jacket for mechanical support. Using this approach we extru...

A novel optical fiber having its cladding doped with Au nano-particles was developed by modified chemical vapor deposition process. Absorption peaks of the optical fiber preform and the fiber appearing at 585 nm and 428 nm, respectively were due to surface plasmon resonance (SPR) of the incorporated Au nano-particles in the cladding. The measured peak wavelength of the SPR was found to increase...

Laser remanufacturing has been used as an approach to refurbish or to improve the surface quality of high-priced parts. However, most of the existing systems lack measuring and modelling functions, which results in the uncertainty of the quality of end products. This paper presents a three-dimensional Laser Remanufacturing System (LRS) based on the integration of reverse engineering and laser c...

We demonstrate the trimming of silicon-on-insulator ring resonators with a cladding layer of polymerizable liquid crystal. An electric field is applied over the cladding layer to tune the resonance of the ring resonators, which is then fixed by UV illumination of the polymerizable liquid crystal. A range of 0.56 nm is obtained. We provide the material properties of the polymerizable liquid crys...

We propose a kind of photonic crystal fiber (PCF) designed with an annular core and fabricated using a single material. Characteristics of such fibers, including the mode field distributions of both the core and cladding modes, the effective mode area of the fundamental core mode, and the dispersion profile, are investigated using the finite element method. The coupling between the fundamental ...

We demonstrate a novel polarization maintaining hollow-core photonic bandgap fiber geometry that reduces the impact of surface modes on fiber transmission. The cladding structure is modified with a row of partially collapsed holes to strip away unwanted surface modes. A theoretical investigation of the surface mode stripping is presented and compared to the measured performance of four 7-cells ...