STATEMENT OF PROBLEM In some clinical situations, the length of either a prepared tooth or an implant abutment is shorter than ideal, and the thickness of a porcelain crown must be increased. Thickness of the coping and the veneering porcelain should be considered to prevent mechanical failure of the crown. PURPOSE The purpose of this study was to investigate the influence of veneering porcel...

In August 1992, a physician notified the Alaska Division of Public Health (ADPH) that three patients at a psychiatric hospital had consumed ceramic glaze during ceramic therapy (i.e., recreation therapy involving the production of ceramic ware), and two of these patients had elevated blood lead levels (BLLs). This report summarizes the ADPH's investigation of these ingestions.

Ceramics have excellent mechanical properties and very stable wear characteristics and therefore have been used in many industries including automotives, aeronautics and healthcare. The use of ceramics in total hip arthroplasty has been increasing. This review article we will provide an overview of where we started and how far we have come. We will review the mechanical properties of ceramics, ...

A shaped, magnetic ceramic was obtained from a metal-containing polymer network, which was synthesized by thermal polymerization of a metal-containing organosilicon monomer. Pyrolysis of a cylinder, shape, or film of the metal-containing polymer precursor produced a low-density magnetic ceramic replica in high yield. The magnetic properties of the shaped ceramic could be tuned between a superpa...

AIM This study has compared the Shear Bond Strengths (SBSs) of ceramic brackets and metal brackets. MATERIALS AND METHOD Forty freshly extracted, human maxillary first premolars were selected for bonding. They were equally bonded with ceramic brackets (Transcend series 6000) and metal brackets (Mini Dynalock Straight wire brackets). A no - mix orthodontic adhesive system was used. Their shear...

The paper deals with calculation of the parameters of ceramic material from a set of destruction tests of ceramic heads of total hip joint endoprosthesis. The standard way of calculation of the material parameters consists in carrying out a set of 3 or 4 point bending tests of specimens cut out from parts of the ceramic material to be analysed. In case of ceramic heads, it is not possible to cu...

The aim of this study was to evaluate the in vitro color agreement between nanofluorapatite ceramic discs (e.max Ceram / Ivoclar Vivadent / A2) associated with try-in pastes and those bonded with resin cements (Vitique / DMG/ try-in shade A2½ and cement shade A2½, Variolink II / Ivoclar Vivadent / try-in shade A1 and cement shade A1, and Choice 2 / Bisco / try-in shade A2 and cement shade A2), ...

Dislocation is a common reason for revision following total hip replacement. This study investigated the relationship between the bearing surface and the risk of revision due to dislocation. It was based on 110 239 primary total hip replacements with a diagnosis of osteoarthritis collected by the Australian Orthopaedic Association National Joint Replacement Registry between September 1999 and D...

Introduction: The rehabilitation of teeth by means of ceramic indirect restorations has been widely performed. Previous studies has shown the effectiveness of silane coupling agents on improving the bond strength of the adhesion of resin cements to ceramics; however, some studies question the use of silane. Objective: To evaluate the effect of silane application on the microtensile bond strengt...

The wear resistance of denture teeth is important to the longevity of removable prostheses of edentulous patients. The ability of denture teeth to maintain a stable occlusal relationship over time may be influenced by this property. The purpose of this in vitro study was to evaluate the wear resistance of polymethyl methacrylate (PMMA) denture teeth based on their chemical composition when oppo...