A polypropylene microporous membrane (PPMM) was fabricated by thermally induced phase separation (TIPS) method. The effects of protein size and structure as well as filtration pressure on the membrane performance and fouling mechanisms were investigated using two different proteins, bovine serum albumin (BSA) and collagen, in dead-end filtration setup. Obtained results showed that, for each pro...

Crude oil fouling of the equipment surfaces is a troublesome issue which leads to operating difficulties, economic penalties, increased environmental impacts, and health and safety hazards in petroleum industry. With a rough estimation, a minimum cost of equal to 4 million barrels of oil/year is required to be invested to offset the costs of crude oil fouling in Pre-heat Trains of Iranian oil r...

Catalytic membrane ozonation is a hybrid process that combines filtration and catalytic ozonation. The deposited with an appropriate solid material acts as catalyst. As consequence, the contactor can act simultaneously (i.e., improving transfer/dissolution of gaseous ozone into liquid phase), well reactor oxidizing organic compounds). It be used in water wastewater treatment limiting disadvanta...

To generate polyethersulfone membranes with a biocatalytically active surface, pancreatin was covalently immobilized. Pancreatin is a mixture of digestive enzymes such as protease, lipase, and amylase. The resulting membranes exhibit self-cleaning properties after “switching on” the respective enzyme by adjusting pH and temperature. Thus, the membrane surface can actively degrade a fouling laye...

THE FOULING OF SHIPS The fouling of ships results in a reduction of speed, an increased cost in fuel, and losses in time and money in applying the necessary -remedial measures. The immediate effect is due to an increase in the resistance to movement of the hull through the water-a' phenomenon known as frictional resistance. Since frictional resistance is the basic phenomenon on which the most i...

Membrane bioreactor technology exists for a couple of decades, but has not yet overwhelmed the market due to some serious drawbacks of which operational cost due to fouling is the major contributor. Knowledge buildup and optimisation for such complex systems can heavily benefit from mathematical modelling. In this paper, the vast literature on hydrodynamic and integrated MBR modelling is critic...

The application of low pressure membranes (microfiltration/ultrafiltration) has undergone accelerated development for drinking water production. However, the major obstacle encountered in its popularization is membrane fouling caused by natural organic matter (NOM). This paper firstly summarizes the two factors causing the organic membrane fouling, including molecular weight (MW) and hydrophili...

The water fraction derived from the hydrothermal liquefaction of a lignin-rich feedstock was subjected to aqueous phase reforming produce hydrogen. Deactivation catalyst observed, and it ascribed fouling phenomena caused by phenolic oligomers. Simple aromatics like guaiacol phenol, as well inorganics, were proved not be cause deactivation thanks use multi-component synthetic mixture. influence ...

because most contaminants in water create strong interactions with hydrophobic surfaces, there are usually problems such as flux decline and pore blocking in polyethylene (pe) membranes due to irreversible adsorption of foulants on their intrinsic hydrophobic surface. therefore, in this work, attempts were made to improve the properties of pe membranes in terms of water flux and membrane foulin...

Residential air conditioning is responsible for a substantial amount of peak electrical demand and energy consumption throughout most of the United States. Coil fouling, the deposition of indoor dusts and other particulate matter on evaporator heat exchangers, increases system pressure drop and, correspondingly, decreases system air flow and air conditioner performance. In this paper, we apply ...