The high cycle fatigue behaviour of autoclave-cured carbon fibre-reinforced polymer (CFRP) composite gears is investigated. CFRP were milled from a plate and tested in mesh with steel drive gear under five torque loads ranging between 0.4 0.8 Nm unlubricated conditions. A detailed damage analysis conducted by employing scanning electron microscopy high-resolution optical microscopy. Epoxy matri...

Unmanned Aerial Vehicles (UAVs) have high popularity, especially in the military field, but are now also being applied to private and public sectors. One of UAV components that require material technology is wing. The latest developed as a for unmanned aircraft wings composite has strength lightweight. This research aims identify materials can be used wing structures. method this qualitative wi...

This paper presents an experimental study on the development of polymer bio-composites. The powdered coconut shell, walnut shells and Rice husk are used as reinforcements with bio epoxy resin to form hybrid composite specimens. The fiber compositions in each specimen are 1:1 while the resin and hardener composition 10:1 respectively. The fabricated composites were tested as per ASTM standards t...

Results of an investigation of the mechanical performance of injection moulded long glass-fibre reinforced polyamide 6,6 composites are presented. The glass-fibre content in these composites was varied over the range of 10-50% by weight using fibres with average diameters of 10, 14 and 17 μm. Impact testing was carried out at -40, 23 and 80°C on dry-as-moulded and boiling water conditioned samp...

Results of an investigation of the mechanical performance of injection moulded long glass fibre reinforced polyamide 6,6 composites are presented. The glass fibre content in these composites was varied over the range 10-50% by weight using fibres with average diameters of 10, 14, and 17 micrometres. Mechanical testing and analysis of the apparent interfacial shear strength was carried out at 23...

OBJECTIVE The aim of this in vitro study was to determine the load and deflection at failure of different lingual retainers bonded with composite to enamel in a standardized three-point bending test. The results were rationalized with finite element analysis (FEA) models. MATERIALS AND METHODS Four types of multistranded wires, Dead Soft Respond, Twisted ligature, Penta-One, Gold-plated Penta...

Failures in composite materials occur mainly due to interlaminar fracture, also called delamination, between laminates. This indicates that characterizing interlaminar fracture toughness is the most effective factor in the fracture of composite materials. This study reports investigation on mixed-mode interlaminar fracture behaviour in woven carbon fibre/polyetherimide (CF/PEI) thermoplastic co...