Inverters are commonly used in various motor applications. This greatly increases the pulse endurance stress of the wire due to switching transience. A new type of wire with two layers & three layers of Corona resistant material has been developed by BCwire® to overcome the aforementioned problem. This paper will give a brief introduction of the wire, detailed test procedure, and preliminary re...

Buildings consume too much energy. For example, 16.6% of all the energy used in the United States goes towards just the heating and cooling of buildings. Many governments, organizations, and companies are setting very ambitious goals to reduce their energy use over the next few years. Because the time periods for these goals are much less than the average lifetime of a building, existing buildi...

ii iii ABSTRACT This report documents experiments conducted to determine the head-loss characteristics associated with calcium silicate insulation debris accumulated on a sump screen. These experiments were performed under the direction of Los Alamos National Laboratory in facilities operated by the Civil Engineering Department of the University of New Mexico. Experiments confirmed that calcium...

Using a mathematical heat transfer model including anisotropic heat conduction, radiation, and RF heating, we use our software WIAS-HiTNIHS 1 to perform numerical computations of the temperature field in axisymmetric growth apparatus during sublimation growth of silicon carbide (SiC) bulk single crystals by physical vapor transport (PVT) (modified Lely method). As it is not unusual for the ther...

This paper presents a novel approach based on the back-propagation neural network (BPNN) for the insulation diagnosis of power transformers. Four epoxy-resin power transformers with typical insulation defects are purposely made by a manufacturer. These transformers are used as the experimental models of partial discharge (PD) examination. Then, a precious PD detector is used to measure the 3-D ...

By restricting the electron-collection area of a cold Langmuir probe compared to the ion-collection area, the probe floating potential can become equal to the space potential, and thus conveniently monitored, rather than to a value shifted from the space potential by an electron-temperature-dependent offset, i.e., the case with an equal-collection-area probe. This design goal is achieved by com...

The doping effect of graphene nanoplatelets (GNPs) on electrical insulation properties of polyethylene (PE) was studied by combining experimental and theoretical methods. The electric conduction properties and trap characteristics were tested for pure PE and PE/GNPs composites by using a direct measurement method and a thermal stimulated current (TSC) method. It was found that doping smaller GN...

Using PC-based on-line monitoring system, extensive measurements were performed in insulation blocks cut from the crosslinked polyethylene (XLPE) insulation of 36, 69 and 132 kV rated cables produced in Saudi Arabia. A needle-plane electrode system was used with a needle radius of 10 m. The role of 'applied voltage step-time duration' and associated time resolved initiation and growth of diffe...

Insulation performance of the dielectrics under extreme conditions always attracts widespread attention in electrical and electronic field. How to improve the high-temperature dielectric properties of insulation materials is one of the key issues in insulation system design of electrical devices. This paper studies the temperature-dependent corona resistance of polyimide (PI)/Al2O3 nanocomposit...

We report the case of a 35-year-old woman who developed pulmonary alveolar proteinosis requiring multiple lavage treatments, in association with household exposure to ventilation system dust comprised at least partially by a cellulose fire-resistant fibrous insulation material. Scanning electron microscopy with energy-dispersive x-ray analysis documented the presence of spectral peaks consisten...